User manual SILVERCREST SWKS 2400

[. . . ] Ensure that the appliance is standing securely and vertically before switching it on. This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the applianice is to be used. Children should be supervised to ensure that they do not play with the appliance. In older electrical installations, the building fuse (12 A) may be triggered due to the high power consumption. [. . . ] Pour this water away when the procedure has been completed. Fill the appliance with water up to the MAX marking on the scale 7 and then bring it to the boil. First remove the plug from the wall power socket before you lift the kettle from the base 4. This avoids the risk that any water splashing out could come into contact with live electrical connections in the base 4, which could cause a short circuit. Take any decalcifying agent used for kitchen utensils (e. Decalcifiers for coffee machines) from a grocery shop. For safety reasons, the lid 1 should not be opened while the water is boiling or is very hot. There is a risk of receiving severe scalds. Press from the front against the upper lug sitting in the middle of the pouring sieve 8 and at the same time hold it firmly by the flap. Clean the pouring sieve 8 with a lightly moistened dishcloth and under running water. After cleaning it, place the pourer sieve 8 from inside against the opening. Should the scale deposits in the pourer sieve 8 be firmly settled, lay it in a water-vinegar solution, with a ratio of 6:1, for a few hours. the scale deposits will dissolve themselves. Rinse the pourer sieve 8 with lots of clear water. there are no operating elements inside. An open housing can create the risk of a life-threatening electrical shock. Never submerse any parts of the appliance in water or other liquids!This can create the risk of a life-threatening electrical shock if residual liquid comes into contact with powered components. First, remove the plug from the power socket and allow the appliance to cool down completely. Clean the exterior surfaces and the power cable with a slighly damp cloth. Be sure to dry the appliance well before taking it back into use. For stainless steel surfaces, you can use appropriate cleaning agents from a specialized dealer. [. . . ] The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. Your statutory rights are not restricted in any way by this warranty. The warranty period will not be extended by repairs made under warranty. this applies also to replaced and repaired parts. [. . . ]