Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SIMA CT-2. We hope that this SIMA CT-2 user guide will be useful to you.
Lastmanuals help download the user guide SIMA CT-2.
Detailed instructions for use are in the User's Guide.
[. . . ] If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: * Re-orient the receiving antenna * Relocate this equipment with respect to the receiver * Move this equipment away from the receiver. * Plug this equipment into a different outlet so that this equipment and receiver are on different branch circuits. If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find "How to Identify and resolve Radio/Television Interference Problems" prepared by the FCC helpful. [. . . ] should be connected between your playback VCR, DVD or camcorder and the recording VCR or DVD as shown below. Note: Regardless of which input is used, both outputs continuously deliver an output signal. The unit will automatically detect whether the video input is in NTSC (USA) or PAL (Europe) format. The output format is determined by the setting of the PAL/NTSC output switch. (See diagram below)
No picture
· Is the Power light on?· Is the connecting cable of the plug-in adapter
damaged?
Picture rolling
·
TV does not support 50/60 Hz scan rates.
GoDVD!will not perform the following functions: 1. Allow you to play a PAL DVD or video tape on a NTSC player. Allow you to play a PAL DVD or video tape on an NTSC TV that supports only 60 Hz scan. Allow you to copy an NTSC DVD or video tape to an NTSC DVD recorder or VCR in the PAL format to send over seas, unless the recorder supports both formats.
Only the video cables are to be connected to GoDVD!. Audio cables should be connected directly between the playback and recording units. With Hi-8 or SVHS capability, connect your S-video cables to GoDVD!.
Operation
1. Connect the GoDVD unit as shown on page 3. Select the PAL/NTSC output format by setting the PAL/NTSC output switch to the desired setting. Note: The unit will automatically detect whether the input is PAL or NTSC, however you must select the desired output format. televisions, VCRs and DVDs, set the output format switch to NTSC. Select the appropriate input by pressing the Input select switch. Green indicator light signifies Composite signal. Orange indicator light signifies Svideo input signal. Select the desired video enhancement mode by pressing the Video Enhancement button. [. . . ] An orange blinking light indicates an S-video input signal with one of three enhancement modes. Use the steady indicator light as a fixed point to determine the desired enhancement mode. Review the chart below to determine the correct setting. If unsure which video enhancement mode is selected, look at your video monitor while toggling through the options.
OUTPUT NTSC (Fsc=3. 58 MHz) / PAL (Fsc =4. 43 MHz) Output Connectors Composite Video (RCA jack) x 1 / S-video (mini-din) x 1 Power: DC 7. 5V 500mA Dimensions: 4. 5"(W) x 2. 5"(L) x . 75"(H)
6. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SIMA CT-2
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SIMA CT-2 will begin.
