User manual SIMA SUP-60

[. . . ] The connectors allow you to match the size of your device's DC input jack. If your device requires other types of connectors, visit Sima's customer service at www. simacorp. com. The connectors supplied with the SUP-60 are all set in a center pin positive alignment ( Fig. A) If your device requires a center pin negative power source (Fig. [. . . ] If the device does not operate, disconnect the connector from the device, reset the voltage switch to the next higher setting and re-connect. Do not continue trying higher settings as they may result in damage to your device or the adapter. The SUP-60's current (mA) must be equal to or greater than the current your portable device requires. Use the following chart to determine the output current from the SUP-60: Output Max. Voltage Current Voltage Current 3. 3V = 2. 1A 6. 5V = 1. 7A 4. 2V = 2. 0A 8. 4V = 1. 6A 5. 0V = 1. 9 A 9. 5V = 1. 5A Resetting the Adapter CAUTION: If the power light turns off, check the power source. If on, the output current may be beyond the AC adapter's specifications and overload protection has been activated. Remove the SUP-60 from the AC outlet and the device you are powering. Plug the SUP-60 into the AC outlet again. If the indicator remains off, there may be a problem with the AC adapter. Contact Sima's customer service for assistance. This warranty is void if any defects are caused by abuse, misuse, negligence or unauthorized repairs. All liability for incidental or consequential damages is specifically excluded. Some states do not allow for the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may have other rights, which vary from state to state. Conditions: Ship your unit, freight pre-paid, including reasonable proof of date and place of purchase and description of problem to: Sima Products Corporation Attn: Customer Service 140 Pennsylvania Ave. #5 Oakmont, PA 15139 90-day Limited Warranty Sima Products Corporation warrants this product against defects in materials and workmanship for a period of 90 days from the date of purchase. During the warranty period, the product will be repaired or replaced at Sima's option. Mail the enclosed product registration card within ten days of the original purchase. 2 Universal Power Adapter For use with digital cameras and camcorders. Model SUP-60 www. simacorp. com Can't find your plug?Visit our website Power light Output socket Fig. 1 + Specifications: AC adapter input: 120V AC, 60 Hz AC adapter output: 13. 5V DC, 1. 2A SUP-60 input: Output rating: DC cord length: Operation Temp: Storage temp. : Dimensions: 12-15V DC, 3. 3 / 4. 2 / 5 / 6. 5 / 8. 4 or 9. 5V DC 1m 32 to 113 degrees F -4 to 140 degrees F 4" x 2. 1" x 1. 4" Plug # & Size (diameter) 4. 0 mm x 1. 7 mm 4. 75 mm x 1. 7 mm 3. 5 mm x 1. 35 mm 3. 0 mm x 1. 0 mm Sony L/M Sony S/C Sony F/C Safety warnings and Cautions WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture. CAUTION: To reduce the risk of electric shock, do not remove cover or back. IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS This manual contains important safety and operating instructions for your AC power adapter. Before using your adapter, read all instructions and cautionary markings on the product. DANGER: To reduce the risk of fire or electric shock, follow these instructions. [. . . ] CAUTIONS: The adapter must attach to the power supply source with a built-in over-current protective device (Max. 15A), such as a 15A fuse and branch circuit. Make sure the adapter is disconnected from the AC outlet and device before adjusting the voltage setting. Do not use the adapter to power a device that exceeds the maximum power rating. [. . . ]