User manual SIMA SZM-2

[. . . ] Microphone care and handling · · · · · Remember to turn off the microphone (use setting switch) to save battery power. Avoid moisture, dampness or immersion in water. [. . . ] May not be connected properly to camcorder or audio board. Replace if needed. 140 Pennsylvania Ave. Bldg #5 Oakmont, PA 15139 800-345-7462 www. simacorp. com ©2004 Sima Products Corporation PN21698 Congratulations on your purchase of Sima's new Zoom Microphone, Model SZM2. This high quality electret condenser microphone is designed for super-directive telescopic use with high sensitivity and extreme low noise. It can pick up a sound source clearly and naturally at both short and long distances, even in noisy environments. It has two custom sound/distance settings to maximize the audio effect you want to achieve. The SZM-2 is designed for outdoor sports broadcasts, stage, video and/or movie productions. It can be mounted on a camcorder, a tripod, a traditional stand or handheld. Cables The SZM-2 comes with a 2. 5' coiled cable and a 25' straight cable. Each has a screw-on connector for connection to the SZM-2. Mounting The mounting handle includes an adjustable shoe mount that threads into the bottom. By removing the shoe mount, the handle will screw directly onto a standard microphone stand. [. . . ] Replace cover before using. Specifications Type System Sensitivity Freq. Response Output Impedance Power Source Sound Pressure level Signal to Noise Ratio Accessories Battery life Super Cardioid Electret Condenser Switchable, uni-directional, variable range Normal: -70 dB (1V/µ bar 1KHz) Zoom: -51 dB (1V/µ bar 1KHz) 80 Hz ~ 12, 000 Hz 560 ohm (normal ) 2. 3K (telescopic) DC 1. 5 AA battery (not included) 120 dB Maximum 40 dB or more Windscreen and mike holder 500-2000 hours (alkaline ­ not included) SZM-2 polar response in "Zoom" mode [. . . ]