User manual SIMPLETECH 60000-00095-003

[. . . ] However, SimpleTech strongly recommends using a DHCP server to assign IP addresses to the devices on your network. Otherwise, depending on how your network is configured, you may have to manually setup the computers on your network to communicate with SimpleShare. INSTALLATION REQUIREMENTS No drivers, special tools or equipment are required to install SimpleShare. VISUAL TOUR Front Ready LED (Blue) Indicates SimpleShare is Ready (active mode). HDD LED (Green) Indicates disk drive read/write activity. [. . . ] Then, run SimpleShare Administrator and setup the device. Detailed instructions on attaching a USB drive or printer to SimpleShare are provided in the SimpleShare User's Guide. RUNNING NASFINDER NASFinder searches your network for attached SimpleShare servers, then assists you in performing basic configuration tasks like renaming SimpleShare, changing its logon security settings and mapping shared folders. Insert the NASFinder Setup CD into your computer's CD-ROM drive. If NASFinder does not start automatically, click the Start menu, select Run. In the Run dialog box, enter x:nasfinder. exe (where x is the drive letter of the CD-ROM drive) and click OK. Follow the onscreen instructions to locate SimpleShare and complete the setup process. During setup, NASFinder prompts you to enter SimpleShare's administration username and password. If you are setting up SimpleShare for the first time or if you have never changed the username or password, enter the default username "admin" and password "simple. " Refer to NASFinder online help for additional information. 4 ACCESSING SHARED FOLDERS IN WINDOWS 1 In the Address bar of your browser, enter \\simpleshare and press Enter. 2 In the logon dialog box, enter SimpleShare's default username "admin" and password "simple. " If you want the system to remember your password, click Remember my password. SimpleShare's root directory appears in Windows Explorer, listing its shared folders. If the logon window does not appear, make sure SimpleShare is in Ready mode and properly connected to the network. Then, try to connect to SimpleShare again. If you are still unable to connect to SimpleShare, use NASFinder to locate the server. Mapping Shared Folders in Windows 1 In Windows Explorer, click Tools>Map Network Drive to run the Map Network Drive wizard. 2 Accept the next available drive letter, displayed in the Drive list or choose a different letter. In the Folder list, type \\Simpleshare\NetFolder or use Browse to locate NetFolder on SimpleShare. If you want your computer to reconnect to NetFolder each time you reboot your computer, click Reconnect at logon, and then click Finish. 5 ACCESSING SHARED FOLDERS IN MAC OS 1 Open the Go menu and click Connect to Server. 2 In the Connect to Server window, select SimpleShare from the servers listed in the left pane. [. . . ] This equipment carries the CE marking in accordance with European Directives EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11. GPL Statement: Portions of this product, in part, use GPL/LGPL software. Please see the GNU license document on the NASFinder Quick Setup CD for information concerning the terms of the license. To obtain a copy of our open source software, please send a message to SimpleTech Technical Support at support@simpletech. com. [. . . ]