User manual SIMRAD ES60 BROCHURE

[. . . ] A Simrad ES60 system can have a choice of up to four high power transceivers. For highest performance these are installed close to the transducer and linked to the bridge with a single data cable. Frequencies are available from 12kHz to 200 kHz, with up to 4 kW transmitting power. [. . . ] Depth, transducer coverage area and Gain Large echogram memory The large memory capacity in the Simrad ES60 allows many hours of echograms to be stored. The recorded data can be replayed at high speed and presented in a few minutes. The replay can be done with different Gain, TVG and Range settings. Split Beam Technology Fishery scientists use this unique Simrad feature world-wide. The 38kHz recording show 40 cm Argentines at more than 400 meter depth. The fish size analyzer (see detail image), depicts true fish size by echo color, and size distribution on a bargraph. True fish size with split beam technology The Simrad ES60 Split Beam is a calibrated sounder that shows echo colors in true fish sizes. The fish plot shows single fish targets for distinguishing fish from bait. 2 4 1 5 2 3 2 Fish Size histogram 1. Fish Plot The fish plot presentation is a single fish position tracking display and indicates where the fish is in the echosounder beam. 4. Echogram A high performance, multi-frequency deep water fish finder with a large dynamic range. Single fish detection below 1000 meter. 2. Fish Size Histogram. A fish size analyzer, depicting true fish size by echo color, and size distribution on a bargraph. 5. Indication of depth in meters - the diameter of transducer coverage area and the Gain setting, can be selected at any point in the echogram. 3. Bottom Expansion 1 Fish Plot Bottom locked scale expansion. Gives more detailed information of fish close to the bottom. Multi-frequency presentation 4 Echogram 1 2 3 3 Bottom Expansion Improved catchability with multi frequency presentation. 200 kHz. Simrad Combi Transducers more effective and highly sensitive at any depth New transducers have been designed for the fishing industry using the very latest Simrad technology. Connected to a Simrad Echosounder, these instruments are highly sensitive at any depth and capable of detecting single fish below 1000 meters. Through new developments in design Simrad transducers are more efficient therefore requiring less power than the competitor's transducers to perform equally or better. A Simrad 1kW transducer compares often to transducers needing up to 3kW to perform equally. The importance is how much energy is transmitted into the water from the transducer and not how much energy is pumped into the transducer for there to be converted mostly to heat. Detection depths. ES18 Bottom and fish detection in meters Modern manufacturing of high technology transducers demands the utmost of accuracy, cleanliness, patience and hours of testing. ES 200-7 / 120-7 Combi-D ES 38-10 / 38-9/ 50-7 The diagram shows calculated detection depth to the bottom and a single 60 cm cod for different frequencies and transducers. Main menu Operation dialog box Gain dialog/color threshold 15" high resolution, non-flickering color LCD monitor Split beam gives color bars with true fish size Echo trace diagram Rugged housing designed for the marine environment Range dialog Echogram dialog Fish loupe/A-Scope The LCD display can be bulkhead mounted or flush mounted to suit your requirements 20" color LCD monitor New compact Processor Unit - for easy and space saving installations 18" color LCD monitor ES60 DUAL FREQUENCY SYSTEM ECHOSOUNDER ES60 TRIPLE FREQUENCY SYSTEM ES60 QUAD FREQUENCY SYSTEM ECHOSOUNDERS ECHOSOUNDER ES60 PROCESSOR UNIT TRANSCEIVER UNIT GPT ES60 PROCESSOR UNIT VGA SPLITTER ES60 PROCESSOR UNIT TRANSCEIVER UNITS TRANSCEIVER UNITS GPT GPT GPT GPT GPT TRANSDUCER TRANSDUCERS TRANSDUCERS Simrad CM60 - New Automatic seabed mapping system with chart plotting function and bottom discrimination The Simrad CM60 is a 2 and 3 dimensional chart mapping system. Connected to the ES60 you can make detailed seabed maps with bottom data. [. . . ] Data output (NMEA 0183) Bottom output to sonar, trawl system, chartplotter etc. Data output LAN (Ethernet) Bottom discrimination data to Simrad CM60 chartplotter Data input (NMEA 0183) Trawl depth from ITI or FS depth sensor Trawl height from ITI sensors Lat. /Long. from GPS Net depth from PI30 Purse Seine System Supply voltage: 95 - 265 V AC General Purpose Transceiver, GPT Operating frequencies: 1 or 2 Split Beam frequencies: 18, 38 , 70, 120 and 200kHz Single Beam frequencies 12, 18, 27, 38, 50, 70, 120 or 200 kHz Power output: 12kHz:Variable up to 2kW 18kHz:Variable up to 2kW 27kHz:Variable up to 3kW 38kHz:Variable up to 4kW 50kHz:Variable up to 2kW 70, 120 and 200kHz: Variable up to 1kW Dynamic range in receiver: 140dB Supply voltage: 95 - 265 V AC, 12V DC, 50-100W Note: Specifications are subject to change without notice. 85 mm (3. 3") 284 mm (11. 1") 246 mm ( 9. 7") Supplier: Simrad Inc. [. . . ]