Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SIMRAD PI REMOTE ADAPTER. We hope that this SIMRAD PI REMOTE ADAPTER user guide will be useful to you.
Lastmanuals help download the user guide SIMRAD PI REMOTE ADAPTER.
Manual abstract: user guide SIMRAD PI REMOTE ADAPTERSCHEMA REV A
Detailed instructions for use are in the User's Guide.
[. . . ] When the sensor is not in use, check that the sensor lamp does not flash, as this indicates that the sensor is still active and discharging the batteries. If you operate with Fast update rate, the sensors must be charged approximately every 40 hours. Used with Normal or Slow update rates, the operational life is approximately 80 or 110 hours respectively. [. . . ] The optimal sensor charging temperature is from +10 to +25° C. Note: Charging sensors at sub-zero temperatures can create explosive gasses. Simrad assumes no liability for the improper charging of sensors or the use of chargers not specified in Simrad's sensor charging documentation. The two rubber inserts provided at the bottom of each sensor adapter must not be replaced with any other types or designs. It is essential that these inserts provide a secure cradle
C
D
A
E
B
(CD012201B)
(A) The Spread sensor is mounted in a special adapter on the port trawl door. (B) The Remote/Depth sensor is mounted in an adapter on the starboard door. (C) The Spread sensor communicates the distance between the trawl doors to the PI system on the vessel. If the depth is out of range, the displays shows ???.
A F H
D1
B
[m]
C
D
E
G
25. 6 18
(CD012206G)
(A) Sensor identification (B) Unit of measurement (C) Depth (D) Depth change per minute (E) Arrow pointing "down" means that the depth is increasing.
Arrow pointing "up" means that depth is decreasing. (F) Visual alarm (G) Sensor transmission indicator (H) Interference warning
Mounting and installation principles The PI Remote/Depth sensor and the Spread (or Spread/Depth) sensors must be mounted in dedicated adapters on each trawl door. These adapters must be installed beforehand. Detailed information on how to install the adapters are provided with the installation kit. The PI Remote/Depth sensor is mounted on the starboard door, while the PI Spread (or PI Spread/Depth) sensor is mounted on the port door. Note: It is essential that there is a clear line of sight between the two transverse communication "eyes" (one on each sensor). It is also important that both the PI Spread (or Spread/Depth) and the PI Remote/ Depth sensors have a clear line of sight to the hydrophone on the vessel. [. . . ] Note: It is essential that there is a clear line of sight between the two transverse communication "eyes" (one on each sensor). It is also important that both the PI Spread (or Spread/Depth) and the PI Remote/ Depth sensors have a clear line of sight to the hydrophone on the vessel. Sacrificial water switch The water switch on your sensor is a sacrificial brass screw. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SIMRAD PI REMOTE ADAPTER
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SIMRAD PI REMOTE ADAPTER will begin.
