User manual SINGER 111W101

[. . . ] Always unplug before replacing a sewing machine bulb. Replace bulb with same type rated 12 Volts, 5 Watts. WARNING-- To reduce the risk of burns, fire, electric shock, or injury to persons: 1. Close attention is necessary when this sewing machine is used by or near children. Use this appliance only for its intended use as described in this owner's manual. [. . . ] The registered pattern combination will be recalled when pressing this button on the initial screen of the selected mode. Twin needle button (See page 84) Press this button when sewing with a twin needle. Elongation button (See page 69) Press this button to elongate satin stitch patterns. Bobbin winding button (See page 17) Press this button to wind the bobbin. Stitch width adjusting button (See pages 38, 75) Press this button to alter the stitch width. In the monogram mode, pressing the " ­ " button will reduce the letter to 2/3 of the original size. Stitch length adjusting button (See pages 33, 38) Press this button to alter the stitch length. Editing button (See page 77) Press this button to edit the programmed patterns. In the editing mode this button is used to shift the cursor to the left. Help button (See pages 27, 77) Press this button to view alternative applications of certain stitches. In the editing mode this button is used to shift the cursor to the right. 3 Rolled hem foot D: This special foot is for sewing a rolled hem. The curl of the foot helps to form a hem at a constant width. 4 Zipper foot E: This foot is for sewing zippers. The zipper teeth are guided through the grooves on the bottom of the foot. 5 Satin stitch foot F: This clear plastic foot is ideal for satin stitches and decorative stitches. The center groove on the bottom of the foot ensures smooth feeding of dense stitches. 6 Craft foot F-2: This is an open toe satin stitch foot for patchwork and appliqué. 4 5 6 7 8 9 7 Blind hem foot G: This foot is specially designed for blind hemming. The guide on the foot helps feed the fabric and sew a straight and nearly invisible blind-hem. 8 Cording foot H: This foot is specially designed to hold one or three strands of cording to create braiding. 9 Overcasting Foot M: This foot is specially designed to simulate professional style overlocking. The wires on the foot effectively prevent the fabric edge from puckering or rolling. 10 11 10 1/4" Seam foot O: This foot is useful for patchwork piecing. [. . . ] 1 Drop Feed Lever 2 Down position 3 Up position NOTE: The feed dog should be in up position for normal sewing. A message will appear on the LCD screen when starting the machine with the feed dog lowered. The machine will run with the feed dog lowered when pattern D1, D2, 7, 8, 9 (Mode 1) and 11, 12, 13, 14, 15, 16, 26, 29, 61, 62, 63 (Mode 2) has been selected. The machine will not sew with the feed dog lowered when other patterns have been selected. [. . . ]