User manual SINGER 11W4

[. . . ] Inserted stitches will be placed at the cursor position. Only the selected stitch can be adjusted. Move the cursor through the sequence using the arrows (10). Between the arrows the number of the actual stitch will be shown next to the total number of stitches in the sequence. [. . . ] Adjust text and stitches You can mirror, adjust length and width or change the density or position of the selected stitch. The adjustments work just like in sewing mode. Delete a stitch or letter (5) If you want to delete a stitch, move the cursor to the stitch you want to delete and touch the delete icon. Use the long touch function to delete the whole sequence. Duplicate a stitch or letter (6) To duplicate a stitch, move the cursor to the stitch you want to duplicate. Touch the duplicate icon to copy the selected stitch. Note: Make your adjustments on the stitch before duplicating and the copied stitch includes the adjustments. Use the long touch function to get a pop-up where you can enter the exact number of copies you want to insert. Replace a stitch or letter To replace a stitch, simply select it and then touch delete and insert the new stitch. It will be placed at the cursor position. Zoom to all (9) If the stitch or sequence is wider than what can be shown on the screen, you may use the zoom to all icon to see the whole width of the sequence. Your sequence will be shown on a pop-up. If it is too long for the window, it is possible to zoom to all (E) to see the entire sequence. You can also scroll through the sequence with the arrows (F). Sequencing E F Sewing a sequence To sew the sequence, return to sewing mode or embroidery edit. Close sequencing by deselecting the sequencing icon on the task bar. Adjustments made in sewing mode or embroidery mode will affect the whole sequence. However, these changes will not be saved if you return to sequencing. In embroidery edit, the position of the sequence will be kept. In sewing mode it is possible to start sewing anywhere in the sequence. Use the arrows (G) to step through the sequence. G 5:5 Important sequencing information Sequencing can be used in either sewing mode or embroidery mode. A sequence created when embroidery mode is active will become an embroidery design when saved and cannot be sewn as a stitch in sewing mode. To save a sequence If sewing mode is active, you can save your sequence both in personal menu (A) and personal files (B). [. . . ] When re-opening sequencing, it will not be possible to adjust any part of the former stitches in the sequence any more. All parts will be handled as one stitch. To re-load a sequence If sewing mode is active when closing sequencing, your sequence will be loaded to sewing mode and is ready to be sewn. If selecting another stitch in sewing mode and then re-opening sequencing, your sequence will remain unchanged. [. . . ]