Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SINGER 140W1. We hope that this SINGER 140W1 user guide will be useful to you.
Lastmanuals help download the user guide SINGER 140W1.
Detailed instructions for use are in the User's Guide.
[. . . ] Slip the thread behind the first guide directly below the tension dial from right to left. Slip the thread behind the next 4 guides (these are indicated by orange dots below the guide). [. . . ] Next thread the eye of the looper, and then pull the thread towards the back of the serger, leaving approximately 8 inches of thread.
Step 3: Threading Lower Looper: (YELLOW) · · · · Slip the thread behind the first guide directly below the tension dial from right to left. Slip thread behind the 4 yellow thread guides (these are indicated by yellow dots below the guide). Slip thread behind the lower looper using the tweezers as shown in photo #2, until the thread slips into the notch located at the far left on the looper. Next thread the eye of the looper, and then pull the thread over the top of the upper (orange) looper and then towards the back of the serger, leaving approximately 8 inches of thread.
Photo #1
Lower Looper Threading Continued:
Photo #2
Photo #3
Step 4: Threading the Right Needle: (GREEN) · · · · Slip the thread under the first guide directly below the tension dial, and then under the guide just to the left of the first guide. Run the thread over the top thread path indicated by a green dot as shown. Thread through wire guide A located at the top of the right needle and then through the eye of the needle. When using left needle and upper and lower looper (3-thread) set width adjustment at 4. 5 guideline. When using right needle and upper and lower looper (3-thread) set width adjustment at 3. 5 guideline. When doing a 3-thread rolled hem set at R guideline.
Step 7: Threading Tips for the Serger · · · · Use good quality serger thread. spools at most fabric and sewing retailers. Use the same brand of thread in all tensions, do not mix and match brands. Use the same size spools on all cone adapters that are located at the back of the machine when threading your serger. [. . . ] Use the same brand of thread in all tensions, do not mix and match brands. Use the same size spools on all cone adapters that are located at the back of the machine when threading your serger. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SINGER 140W1
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SINGER 140W1 will begin.
