User manual SINGER 141B INSTRUCTION MANUAL

[. . . ] 6 Computer Requirements . . . . . . . . . . . . . . . . . . . . . . 6 Driver Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Software Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Start Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] From the Windows desktop, click on the Start button. At the Run prompt, type the letter of your CD-ROM drive followed by Setup. You may also press the Browse button and click on the CD-ROM drive and the setup. exe file. When the setup. exe file is highlighted, press Open. This will copy the command to the command prompt. The next time you plug in your Xchange Box, Windows will automatically recognize your Xchange Box driver. Note Microsoft's Logo compatibility testing is put in place to ensure that users do not incur problems with equipment manufacturers' products. While the Xchange Box is in the process of gaining "formal" Microsoft approval, it has been tested for use under the Windows XP operating system and is Windows XP compatible. The Xchange Box driver should not yield any problems, therefore, select "Continue Anyway" when this warning appears. More information about Microsoft Logo testing can be found at: http://www. microsoft. com/WINLOGO/ hardware/digitalsignature. asp Warning!If you use Windows 2000, Millennium Edition (ME), or XP, you will see this icon appear at the bottom right corner of your screen (near the clock). To do this, simply verify that the green light on the front of the Xchange Box is on. When you double click the icon to start the Xchange program, it takes a few seconds for the program to open. Make sure you have only opened the program one time. You must only have the program opened one time in order to set up communication between your computer and the Xchange Box. To ensure the program hasn't been opened twice, look at the bottom of your monitor screen between the "Start" button on the left and the clock on the right. If you see a square with "Converter Box" and a picture of the box more than once, you need to exit one of the programs before you may continue. The Converter Box screen offers you Read, Load and Write Card buttons. The main screen also has Delete, Options and Exit buttons. The Load, Write Card and Delete buttons will be inactive until a design has been read into the software or a card inserted into the slot. A. Not all pre-programmed memory cards are readable. Some manufacturers have disabled this function for their cards. [. . . ] Print Setup Click File, then Print Setup to bring up the print setup dialog box. This dialog box allows you to change the type of printer, properties, paper size and orientation. Exit Click File, Exit to close Color Editor. If you have not saved your work, you will be prompted to do so. VIEW MENU Realistic View Click View, Realistic View. [. . . ]