Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SINGER 151W6. We hope that this SINGER 151W6 user guide will be useful to you.
Lastmanuals help download the user guide SINGER 151W6.
Detailed instructions for use are in the User's Guide.
[. . . ] Check thread to make sure it is not tangled under spool or spool stand.
Table of Contents 6
Previous Page | Next Page
TS+ 151W6
TRIAL SEWING continued. . . · Plug in adaptor and foot switch. (If not already plugged in) Note: Internal threading light turns off when foot switch is plugged into machine. · Press foot switch to continue sewing fabric (under presser foot). [. . . ] · For best sewing performance use proper spool cap.
How To Fix On The Sewing Machine Thread Spools · Put the three threaded spools into the spool pins. · Then slide the thread caps (large size) firmly against rim of spool to prevent thread tangling.
How To Fix On The Overlock Machine Thread Spools · Pull the left & right spool pins outwards to proper position. · Put the three threaded spools into the spool pins. · Then slide the thread caps (small size) firmly into the center of spools to secure the spools.
Table of Contents 10
Previous Page | Next Page
TS+ 151W6
TYING ON THREADING · Clip thread in front of needle. · Pull needle thread until knot appears. · Thread needle
Table of Contents 11
Previous Page | Next Page
TS+ 151W6
THREADING PATH A (LOWER LOOPER) STEP 1 · Draw thread (A) through guide (A-1) · Bring thread through guide (A-2). · Use tweezers to place thread into two discs. · Use tweezers to guide thread down through front guide (A-3).
Table of Contents 12
Previous Page | Next Page
TS+ 151W6
THREADING PATH A continued. . . · Raise lower looper to near internal cover (about 3 mm). This is optimum position for threading lower looper. · Insert threader into left side hole(A-4). · Turn handwheel about 8 times to form thread chain. · If chain will not form check threading. · After producing chain, start to sew on your fabric. Table of Contents 17 Previous Page | Next Page
TS+ 151W6
START TO SEW · Note: Seam guide is preset to limit stitch width to approximately 11 /64 inch (4. 2mm). · Place needle clamp body to lowest position. · Place thread chain 90 to needle. · Place fabric under presser foot touching needle and against seam guide. · Plug in foot switch · Select High or Low sewing speed. · When seam is completed, continue to sew until enough thread tail available for next sewing.
Table of Contents 18
Previous Page | Next Page
TS+ 151W6
SECURING TAIL CHAINS · Apply liquid fray preventer. · Use large needle and thread chains under stitches.
Table of Contents 19
Previous Page | Next Page
TS+ 151W6
TURNING SQUARE CORNER Outside Corner · Sew to point A, one stitch past end of corner. Inside Corner · Stitch, stopping on point B. [. . . ] (page 11) · Swing thread guide holder up. (page 11) · Set needle firmly in position. (page 11) · Thread machine correctly. (page 4)
When thread breaks.
· Incorrect threading. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SINGER 151W6
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SINGER 151W6 will begin.
