Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SINGER 4205. We hope that this SINGER 4205 user guide will be useful to you.
Lastmanuals help download the user guide SINGER 4205.
Detailed instructions for use are in the User's Guide.
[. . . ] For European Territories: This Singer Sewing Machine was tested according to European norms and meets the requirements regarding electrical safety, radio interference and electromagnetic immunity. Dear Customer: We recommend that for future reference you record the serial number of your sewing machine in the space provided (below). This machine should never be plugged in while NOT in use. Always unplug the machine from the electric outlet before cleaning or after using it. [. . . ] The above chart will assist in finding the correct needle for the type and weight of your fabric. Turn handwheel counter clockwise until the needle is in the highest position. Secure thread in place with either the large or small spool pin holder, depending on the size of your thread spool. Pull thread out from the spool through the second thread guide. Place the thread to the right of the Bobbin winder disc, then swing the bobbin thread to the left going under and around the disc, pulling the thread toward the Bobbin winder. Pull the thread through the hole in the bobbin as shown, leaving a 4" tail. Pull the thread from the spool, hold firmly over the first thread guide. Then push the thread down, snapping it into the thread guide. Turn handwheel counter clockwise until the needle is in the highest position. Pull the bobbin visor slide plate forward to open bobbin area. IMPORTANT: Place bobbin into case with the two holes on the bobbin facing up. The bobbin thread should rotate counterclockwise as it comes off the bobbin. The bobbin should lay flush within the bobbin case. Hold the thread tail and step on the foot controller. The needle will not move but the Bobbin winder will turn, winding the bobbin. After the thread has wound around the bobbin 10 times, cut the thread tail. Then continue winding the bobbin until it is full. Pull thread into groove (1) of the bobbin case. Then swing thread to the back pulling it over the groove (2), then pull the thread to the back of the machine. Close bobbin visor slide plate, leaving a 6" thread tail. Turn handwheel counter clockwise until the needle is in the highest position. Turn handwheel counter clockwise until the needle is in the highest position. [. . . ] Try threading each eye of the needle with a different color of thread for an unique effect. Turn handwheel counter clockwise until the needle is in the highest position. Insert the vertical spool pin into the opening to the left of the bobbin winder. Turn handwheel counter clockwise until the needle is in the highest position. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SINGER 4205
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SINGER 4205 will begin.
