User manual SINGER 541A INSTRUCTION MANUAL

[. . . ] Close attention is necessary when this sewing machine is used by or near children or infirm person. · Use this sewing machine only for its intended use as described in this manual. Use only attachments recommended by the manufacturer as contained in this manual. · Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. [. . . ] Use the scroll bar to view your stitch pattern while zoomed in. L M N Decorative sewing S Create a new stitch pattern by placing single stitches When you open the Stitch Creator the workspace is empty. A purple line indicates the middle of the work space. To create a new stitch pattern you must first place the starting point. This means that you set the position of the first stitch in the work space. Touch the Confirm icon (E) to place the starting point and the first stitch. The position of the first stitch is marked with a red frame. E 4:12 Placing single stitches For each additional stitch you want to place, touch the confirm icon (E). To move single stitches V With your stylus or your finger you can work with your stitches directly on the work space by dragging and dropping a selected stitch point. To position a stitch point just touch it on the screen and drag it to the desired position. When you do this you will change the stitch width and the stitch length of the selected stitch. Another way to move the stitch point of a selected stitch and for fine adjustment is to use the stitch length (T) and stitch width icons (U). Touch arrow up or the scroll bar to select the next circle to be deleted. Touch the Delete icon (X) to delete the selected circle. The red frame is now positioned on the tip of the heart and one stitch is selected. Touch the Start sewing icon (1)to open the the sewing menu to see the whole stitch pattern. Touch ESC to return to the work space of the Stitch Creator. 1 Z Y X 4:14 Combining pattern components A In the Stitch Creator you have 8 pattern components for creating new stitch patterns. Touch the More Options icon to open a menu with 8 different pattern components. Touch an icon (A) and the stitch will be positioned on the work space. The window remains open and allows you to select further components. Touch (A) again and the component will be positioned at the end of the first one you selected. Touch OK to close the window. Tip: After selecting a pattern component it's not possible to close the window with the ESC icon. [. . . ] The bulb will be held firmly so you can remove it safely. Bulbs can be purchased from your Pfaff dealer. Maintenance 6:3 What to do if. . . ? In this chapter you are suggested solutions if you have a problem with your creative 2170. For further information please contact your Pfaff dealer who will be pleased to help you. Sewing Problem/Cause The machine skips stitches Did you insert the needle properly?Push the needle fully upwards with its flat side facing the back. [. . . ]