User manual SINGER 81K72

[. . . ] That the water inlet and outlet hoses are connected correctly; 3. That the dishwasher is level on the ground. It is worth it: for the longer life span and the correct operation of your dishwasher. 13) Learn to get to know the parts which make up your dishwasher, you will use it better for it. [. . . ] 16 ARISTON DISHWASHER - Instructions for installation and use D 1509)50-4 Select the right wash cycle A wash cycle for every degree of soil Dishwasher washing guarantees your dishes will be cleaned in a hygienic setting for safer, cleaner results. Salt, rinse aid, the right amount of detergent and the correct wash cycle: this is the formula to get the best results and to keep your dishwasher in shape. If the crockery is only lightly soiled or if it has been rinsed with water before being placed in the dishwasher, reduce the amount of detergent used accordingly. Select the right wash cycle for your dishes. Selecting the most suitable wash cycle for the load ensures clean dishes and a more convenient use of water and electricity. Pre-wash with hot water at 40°C Very dirty dishes and pans Wash at 63°C. (not to be used for 2 Rinses with cold water delicate items) Rinse with hot water at 67°C. Cold rinse Rinse with hot water at 70°C. Cold pre-wash Wash at 48°C Cold rinse Hot rinse at 60°C Drying 3+24 g * 2:00' Cycle for normally dirty pans and dishes. 27 g * 1:33' Daily Wash Environmentally-friendly cycle, with low energy consumption levels, suitable for normally dirty pans and dishes. 3+24 g * 2:25' Rapid & Dry Economic and fast cycle to Short wash at 48°C be used for slightly dirty Hot rinse at 67°C dishes. The connection must be made to hot water supply following the same procedures as those indicated for the cold water connection. Adjusting the Back Feet Insert the appliance into the cutout and then adjust the height using the screws located on the front bottom part of the machine. Use a screwdriver to turn the screws in the clockwise or anti-clockwise direction to increase or decrease the height respectively. Connect the cold water supply hose to a threaded 3/ 4 (gas) connector, and making sure that it is fastened tightly in place. The LV460 A model, have a "Water Stop" water supply pipe. If the water pipes are new or have not been used for an extended period of time, let the water run to make sure that the water is clear and free of impurities. If this precaution is not taken, there is a risk that the water inlet can get blocked and damage the appliance. -It is strongly recommended to use a new hose to connect the dishwasher to the water supply line, and the old hose-set should not be reused. Asking to specilized shop or an authorized Anti-flooding protection Your dishwasher (model LV 460A) is provided with a special system which blocks the water supply in the event of leaks inside the appliance. It is further equipped with a water inlet hose (“WATER STOP”) that can withstand extremely high pressures and that turns bright red in the event of breakage. Safety in the event of flooding is ensured by the second clear hose that contains the former and thus highlights the latter when it has turned bright red. [. . . ] C Keep your dishwasher in shape Respecting these few have a reliable work After every wash. When the wash cycle has ended, always remember to turn off the water supply tap and to leave the appliance door ajar. This way, moisture and bad odours will not be trapped inside. Before carrying out any cleaning ormaintenanceonthedishwasher, always remove the plug from the electricity socket. [. . . ]