User manual SITECOM DC-202V4 QIG

[. . . ] OS with TCP/IP network protocol support. 1 1. 1 Setting up the broadband router Physical installation 1 For the installation of the Broadband router it is assumed that you have at least one PC with a working broadband Internet connection. It is also assumed that the modem is configured in accordance with the requirements of your ISP and of the modem manufacturer. If not, consult your ISP support literature. 2 Before you begin, ensure that the power lead is not connected to either the broadband router or the cable modem/DSL modem. [. . . ] 2. 1. 2 Install TCP/IP If the list that appears on screen does not include a line such as the one that has been selected above ("TCP/IP -> network card"), then follow the steps indicated below to add this line: · Click on the button "Add" · Double - click on "Protocol" · Select "Microsoft" and thereafter "TCP/IP" · Click on "OK" · Wait a few seconds, so that TCP/IP can be added. Thereafter, click "OK" to leave the network properties screen. Restart your PC. 3 2. 1. 3 Configure TCP/IP Select the line "TCP/IP -> Network card" as shown above. Click on the button Properties to obtain a window similar to the following: Check whether the setting "Obtain an IP address automatically" has been selected, as is illustrated above. The DHCP server in the broadband router will now assign an IP address to the PC. Restart your PC, even if you have not made any changes. 2. 2 Configure Internet access method · Windows 98/ME/2000 · In the Taskbar, click on the Start button and select Settings - Control Panel - Internet options. · Select the tab Connections and click on the button Settings. · Select "I want to configure my Internet connection manually" or "I want to make a connection via a LAN network" and click on "Next >". · Select "I want to connect via a LAN network" and click on "Next >". · Check carefully that all of the checkboxes in the screen Internet configuration for a LAN have not been checked. · Continue with the steps in the wizard, until the task is completed. · Windows XP · In the Taskbar, click on the Start button and select - Settings - Control Panel - Internet options. · Select the tab Connections and click the Setup. . . · When the New Connection Wizard starts, click on Next. · Select Connect to internet and click on Next. · Select Set up my connection manually and click on Next. · Select Connect using a broadband connection that is always on and click on Next. · Click on Finish to close the Wizard. · In the Taskbar, click on the Start button and select - Settings - Control Panel - Internet options. · Select the Connections tab and click on the LAN Settings button. [. . . ] Click Next. 8 Depending on the chosen provider, you may need to enter your user name and password and MAC address or hostname in the following window. Click Next. 7 9 Click Finish to complete the configuration. The router will now restart and try to connect to the Internet. Please wait 25 seconds to allow the router to restart. [. . . ]