User manual SITECOM MD-273

[. . . ] MD-272/MD-273 TV Media Player Full Manual Introduction Congratulations on your purchase of the Sitecom MD-272/MD-273 TV Media Player. The MD-272/273 TV Media Player supports playback of the most common file formats of digital video, audio and photo media. Attach the media player via standard AV or HDMI cables to a standard or high-definition TV. The compact size of the device allows you to take it with you to anyone you like and share your digital content. [. . . ] Stop scanning storage ­ do not scan the storage. Please use the `Up' and `Down' buttons to select and press the `OK' button to confirm. 6. 4. 1. 7 Resume Play Settings -> System -> Resume Play The device supports a video resume play function. Use this item to enable or disable the resume play function. 6. 4. 1. 8 Format (MD-272 only) Use this setting to format the internal storage of the TV Media Player. Warning: You will lose all content on the storage!6. 4. 1. 9 Factory Default Settings -> System -> Restore Default Settings Use this setting to restore all TV Media Player system preferences and media playback settings to their default factory values. This is done to correct performance problems caused by a failed firmware upgrade or a faulty configuration setting. 6. 4. 2 Audio Settings -> Audio 6. 4. 2. 1 Night Mode Settings -> Audio -> Night Mode This setting is to switch the "Night Mode". With this setting you can limit the maximum volume output. 6. 4. 2. 2 HDMI Output Settings -> Audio -> HDMI Output This setting is to switch the audio output over the HDMI connection. You can choose between: LCPM ­ Linear pulse code modulation two channel LCPM Multi-Channel - Linear pulse code modulation Multi-Channel 5. 1, 7. 1 RAW ­ Audio Raw data. Use the `Up' and `Down' buttons to select an item and press the `OK' button to confirm. 6. 4. 2. 3 SPDIF Output Settings -> Audio -> SPDIF Output This setting is to switch the Audio SPDIF output. You can choose between: LCPM ­ Linear pulse code modulation two channel RAW ­ Audio Raw data. Use the `Up' and `Down' buttons to select an item and press the `OK' button to confirm. 6. 4. 3 Video Settings -> Video 6. 4. 3. 1 Aspect Ratio Settings -> Video -> Aspect Ratio Use this setting to choose screen ratio. You can choose between: Pan & Scan 4:3 - 16:9 picture in 4:3 screen mode with and adjusted ratio to meet 4:3. Letter Box 4:3 - 16:9 picture in 4:3 screen mode with the black bars top and bottom. 16:9 16:10 6. 4. 3. 2 TV System Settings -> Video -> TV System Use this setting to choose the resolution and TV system. You can choose between: NTSC - National Television System Committee PAL - Phase Alternating Line 480P 576P 720P 50Hz 720P 60Hz 1080i 50Hz 1080i 60Hz 1080P 50Hz ­ Full HD 1080P 60Hz ­ Full HD 6. 4. 3. 3 Video Zoom Settings -> Video -> Video Zoom Use this function to set the video zoom in/out function. 6. 4. 3. 4 Digital Noise Reduction Settings -> Video -> Digital Noise Reduction Use this function to enable or disable the digital noise reduction. 6. 4. 3. 5 1080P 24HZ Settings -> Video -> 1080P 24HZ If the TV supports 1080P 24HZ, you can turn on this option. 6. 4. 4 Network Settings -> Network 6. 4. 4. 1 Wired LAN Setup Settings -> Network -> Wired LAN Setup Set "DHCP IP" or "Fixed IP" for the Ethernet LAN IP configuration of this player. 6. 4. 4. 2 Network Attached Storage Settings -> Network -> NAS Switch the NAS function on or off. 6. 4. 4. 3 Network Info Settings -> Network -> Network Info Display network information like IP Address, MAC Address and etc. 6. 4. 5 MISC Settings -> MISC Various miscellaneous settings. Version Info - Select this setting to display the current hardware and firmware configuration. [. . . ] Press "Prev" "Next" and "Zoom" keys to navigate. WEATHER Select "Add Favorite" and browse to a country and select a city. Press the info key to open the menu, and add it to the favourite. You can now access it from the frontpage. [. . . ]