User manual SITECOM PRINTER SERVER FOR ALL-IN-ONE PRINTERS & STORAGE LN-309

[. . . ] MULTI FUNCTIONAL USB SERVER LN-309 Full manual Sitecom Multi Functional USB server LN-309 1. TABLE OF CONTENTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2. INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2. 1 2. 2 THANK YOU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ABOUT THIS MANUAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3. PRODUCT OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3. 1 PACKAGE CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3. 2 PHYSICAL DESCRIPTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 LED INDICATORS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3. 2. 1 3. 3 FEATURES AND BENEFITS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4. [. . . ] You can see the storage icon in the system tray. · · Just use the new disk as a normal drive. After you finish the disk operations, click the storage icon in the system tray and choose "Safely remove USB Mass Storage Device". · · Note In the Control Center, click the "Disconnect" button to disconnect the USB storage device. Please note that FAT32 and NTFS file system can be fully supported. Only one PC can get the ownership of the same USB device at the same time. In other words, the PC connects the USB device directly & independently, other PCs can not "access" this USB device. Until the USB device is disconnected by the user. Note For USB storage, although NTFS can be supported by the NetUSB technology, it can not be shared among network users. Sitecom Multi Functional USB server LN-309 8. Using the Control Center 8. 1 Using Tools of Control Center You can use the following tools to help you use the server: · · · · · Refresh Server List: renew to auto search the existing servers on the network. Configure Server: configure the highlighted MFP server. Goto Homepage: go to the web pages of the highlighted MFP server. Auto-Connect Printer: perform set printer function of the highlighted MFP server. Connect: Connect your printer, or access the network storage by SMB/CIFS method. The storage access mode must be in Server Mode. Note You can also right-click the mouse button on the highlighted MFP server to get the "Configure Server", "Goto Homepage", "Set Printer", and "Network Storage" functions. Note You can also double-click on the highlighted server to get the "Configure Server" function. 8. 2 Setting up Server Configuration Click the "Configure Server" button to setup the highlighted MFP server. Then type the administrator ID and password to login. 8. 2. 1 General Configuration · · · · Server Name: the name to represent the Server for using SMB protocol Workgroup: the name of the SMB workgroup that the Server belongs to. Description: optionally set to describe the Server. File Server Codepage: generally, the criteria of choosing codepage are based on your Windows codepage. 8. 2. 2 TCP/IP To set the MFP server's TCP/IP configuration and connect TCP/IP network, please see < 4. 2. 4 Setting the IP address Using the Control Center > for details. Please check www. sitecom. com for up to date drivers & utilities, manuals and support 8. 2. 3 Supported Protocols · · · · · · · LPR (Line Printer Remote) Printing: select or clear LPR Printing support. IPP Printing: select or clear IPP Printing support. Raw TCP/ Jet Direct Printing: select or clear Raw TCP / jet Direct Printing support. It is enabled in Factory Default and set some parameters as below : TCP Port: Set TCP port for the printer on the USB1 port (default: 9100) SMB/CIFS Print/File Server: select or clear SMB/CIFS Print/File Server support. It is enabled in Factory Default Internet Access: select or clear Internet Access support. If you clear the item, you do not allow that users can access your SMB/CIFS server via Internet. If you select the item, you allow Internet users to access your storage using the SMB/CIFS protocol. Server Authentication: select or clear Server Authentication support. [. . . ] Upgrade Firmware Note Before starting to upgrade the firmware, please do power off and on the MFP device. It is easy to do by removing the power plug & plugging-in the unit again. 11. 1 Using the Control Center · Note Before starting to search our MFP server, please ensure all the Firewall application software are off or unblock the Control center software under the Firewall software setting. · · · · Select the Server that you want to upgrade the firmware. Double click the selected Server and enter Administrator username (default: admin) and Password (default: admin). [. . . ]