User manual SITECOM WLX-2003

[. . . ] WLX-2003 Introduction Thank you for purchasing the Sitecom WLX-2003 Wall Mount Range Extender N300. With this product you can easily double the signal coverage of your Wi-Fi network for better Wi-Fi quality in homes with many rooms or multiple floors. With both a Wi-Fi extender and a power adapter in a compact design, the WLX-2003 can be plugged directly into an electrical outlet for convenient placement. The smart signal strength LED makes it easy for you to set it up where your Wi-Fi signal needs enhancement. [. . . ] You can set the output power of wireless radio. Unless you’re using this wireless access point in a really big space, you may not have to set output power to 100%. This will enhance security (malicious / unknown users on a distance will not be able to reach your wireless access point). WMM CTS Protect TX Power WPS Wi-Fi Protected Setup (WPS) is the simplest way to establish a connection between the wireless clients and the wireless router. You don’t have to select the encryption mode and fill in a long encryption passphrase every time when you try to setup a wireless connection. You only need to press a button on both wireless client and wireless router, and WPS will do the rest for you. The Push button on the WLX-2003 has 2 functions: Client mode: If you push the button for 0-5 seconds the device acts as a WPS enrollee. In this mode it’s set to connect to your existing Wireless network. You have to push the button on your router within 2 minutes. AP mode: If you push the button for 5-10 seconds the device acts as a WPS registrar. In this mode it’s set to connect client devices to the WLX-2003. You have to push the button on the wireless client or in the utility of the wireless client within 2 minutes. If you want to use the PIN code, you have to know the PIN code of the wireless client and switch it to WPS mode, then fill-in the PIN code of the wireless client through the web configuration interface of the wireless router. Check the box to enable the WPS function and uncheck it to disable the WPS function. WPS Current Status If the wireless security (encryption) function of this wireless router is properly set, you’ll see a ‘Configured’ message here. Otherwise, you’ll see ‘UnConfigured’. This is the WPS PIN code of the wireless router. You may need this information when connecting to other WPS-enabled wireless devices. This is the network broadcast name (SSID) of the router. Self Pin Code SSID Authentication Mode Passphrase Key It shows the active authentication mode for the wireless connection. It shows the passphrase key that is randomly generated by the wireless router during the WPS process. You may need this information when using a device which doesn’t support WPS. In Client mode the device is set to connect to your existing network. In Registrar mode the device is set to connect to your clients. Press the button to start the WPS process. [. . . ] You are not responsible for enforcing compliance by third parties to this License. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. [. . . ]