User manual SITECOM WL-400

[. . . ] (Wireless) IP Camera LN-402/WL-400 Full Manual About This Guide This manual describes Internet Camera, including a description of the features, as well as the installation procedures and web configuration. Included in the manual are the operating procedures for the IPView application. 1 1. Introduction Thank you for the purchase of the Internet Camera connecting directly to an Ethernet or Fast Ethernet. It is different from the conventional PC Camera, the Internet Camera is a standalone system with built-in CPU and web-based solutions providing a low cost solution that can transmit high quality video images for monitoring. [. . . ] If you forget to highlight the camera you want to add, a dialog box will appear to notify you of the error. Make sure to save any changes you have made to keep the information updated. Note 2: You are allowed to add only one camera at a time. When the user add the Internet Camera, four icons will appear, including: "Assign IP to Camera", "Connect/Disconnect", "Erase", "Extra Information" 59 Camera Config Assign IP to Camera Connect / Disconnect Erase Motion record Schedule record Manual record Extra Information 60 10. 3 How to Change Camera Assign IP of New Camera Enter a new IP address in the following dialog box, and it will connect to new camera. 61 10. 4 How to Connect / Disconnect the Image Connect the Image Click the "Connect/Disconnect" button and the preview screen will appear with the video image. Minimize Click to minimize the display screen of the Internet Camera. Maximize Click to maximize the display screen of the Internet Camera. 62 Close Click to close the display screen of the Internet Camera. Always on top Click to have the display screen always appear on the top of the window. Wake up control panel Click to open the control panel again when it is closed. Color setting Click to adjust color of the image. View list Click to check the event list of the Internet Camera. Snapshot Click to snapshot a picture from the Internet Camera. Rotate image Click to rotate the image of the Internet Camera. 63 Disconnect the Image Click the "Connect / Disconnect" button again, the camera will be disconnected. 64 10. 5 How to Delete a Camera Erase Camera To delete a camera, you must select the camera to delete from the IPView SE control panel. Then, click the "Erase Camera" button. After deleting the camera, the IPView SE control panel will appear as below. 65 10. 6 Extra Information Extra Information The screen displays the camera's information. 66 10. 7 How to Adjust the Property Setting System Configure From the control panel, select the button and the dialog box will appear as shown below. Log Storage: 1. Single HDD Reserve Space This option permits reserved space by memory size from 500 MB to 1000 MB. Split Recording File From this option, you can adjust the file size for recording the video images (the default setting is 67 5MB). If the recorded video files reach the file size, video images will be recorded into another file automatically. By File Size - permits recording by file memory size from 5 MB to 50 MB. Storage List This option is used to define the path to save image files. The software will create a camera name folder as the "Storage List" which is allowed to create up to 4 File Path. Recycle: When you enabled this function, it will recycle the HDD space once the disk space is less than the size defined. The size defined can be from 200 MB to 50000 MB. Proxy Server: Select this option to enable the Proxy Server support. Camera Scan Delay: It allows you to have full screen display for each camera one by one. [. . . ] R RARP Reverse Address Resolution Protocol, a TCP/IP protocol that allows a physical address, such as an Ethernet address, to be translated into an IP address. RJ-45 connector is used for Ethernet cable connections. A router is the network software or hardware entity charged with routing packets between networks. RJ-45 Router S Server SMTP SNMP It is a simple computer that provides resources, such as files or other information. The Simple Mail Transfer Protocol is used for Internet mail. [. . . ]