User manual SITECOM WL-504

[. . . ] Wireless Acccess Point Router The information in this guide may change without notice. The manufacturer assumes no responsibility for any errors which may appear in this guide. Fast Ethernet is a trademark of XEROX Corporation. Microsoft, Windows and Windows logo are trademarks of Microsoft Corporation. [. . . ] You can delete the existing stations in the "Existing Stations" column by choosing the stations you want to desert and clicking the "Delete Stations" button. 3. 2. 8 Time You can get the data of the log files by setting the time zone. (See figure3-14 Time Zone) Figure 3-14 Time Zone 23 Wireless Acccess Point Router 3. 3 Browsing the Status 3. 3. 1 Status This screen provides the current information of the device. All of the information provided is read-only. (See Figure 3-15 Status Menu Screen) Router Name: You will see the name of this device in this field. Firmware Version: You will see the installed version of the firmware. WAN IP Configure: This field shows whether or not you have enabled the use of PPPoE connection, Static IP or Dynamic IP. Firewall Settings: -NAT allows all of the computers on your network to use one IP address. -Hacker Attack Protect keeps you from hackers' attack. -DHCP server shows the status of the router's DHCP server function. -Block Hacker Scan makes your Router invisible so that hackers cannot find your Router on the network. -Remote Management allows you to manage this device from the remote site via the network. LAN: These fields display the current IP address and Subnet Mask of the router as seen by the users on your internal network. WAN: These fields display the IP Address, Subnet Mask and Default Gateway of the router as seen by external users on the Internet. DNS (Domain Name Server) shows the IP address of the DNS currently being used. 24 Wireless Acccess Point Router Figure 3-15 Status Menu Screen 3. 3. 2 Wireless Status This screen shows the setting status of the Wireless Channel. Figure 3-16 Wireless Status Screen 25 Wireless Acccess Point Router 3. 3. 3 DHCP Table This table shows the number of clients who exist on your DHCP pool and their information such as MAC Address, Computer name and IP Address. Figure 3-17 shows the DHCP Table Screen. Figure 3-17 DHCP Table Screen 3. 3. 4 Routing Table You will see the current routing configuration such as the address of Destination LAN IP, Default Gateway, Subnet Mask, Metric and the Interface (LAN or WAN). See Figure 3-18 Routing Table Menu Screen Figure 3-18 Routing Table Menu Screen 26 Wireless Acccess Point Router 3. 3. 5 DDNS Status Screen This router supports the DDNS service allowing you to use one specific DNS name while the actual IP address changes. You can see the Dynamic DNS status from this screen. This screen shows the information of the connection status for the supported DDNS server. Figure 3-19 DDNS Status Screen 27 Wireless Acccess Point Router 3. 4 Viewing the Tools 3. 4. 1 System Log You can acquire the information of the system in this screen, including the time, the type and the message. Figure 3-20 System Log 28 Wireless Acccess Point Router 3. 4. 2 Hacker Log You can detect the intrusion from this screen. [. . . ] Select Obtain an IP address automatically. (See Figure 3-37) Note: Windows may ask you for original Windows installation files, supply them as needed. Figure 3-37 TCP/IP Properties 44 Wireless Acccess Point Router 4: Specifications 4. 1 Technical Specifications Standards Protocol IEEE 802. 3, IEEE 802. 3u, IEEE 802. 11b CSMA/CD, PPPoE, PPP, PPTP Client, ARP, DHCP Client and Server, TCP/IP, UDP, ICMP, RIP1/RIP2, DNS Proxy, Dynamic DNS, SNTP Four 10/100 Mbps LAN ports One 10/100 Mbps WAN ports RJ-45 connector WAN Router 10/100 Mbps (Half Duplex), 20/200 Mbps (Full Duplex) LAN Switch 10/100 Mbps (Half Duplex), 20/200 Mbps (Full Duplex) Wireless 1, 2, 5. 5, 11 Mbps 10Base-T: UTP/STP Category 3 or 5 100Base-TX: UTP/STP Category 5 Star Power, Diag, WAN & Wireless per unit, Link/ACT, FULL /Col, 10/100 per port Translate private IP to pubic IP Support multiple public IP translate to multiple private IP Provide public services on the network IPSec, PPTP, L2TP pass through, Hacker Attack Prevention Web-based Configuration Ports Connector Speed Cabling Type Topology LED NAT Multiple DMZ Virtual Server Firewall Access Control IP/MAC filter Management 45 Wireless Acccess Point Router 4. 2 Environmental Information Dimensions Unit Weight Power Metal Case Plastic Case Metal Case Plastic Case DC 5V/2A 170 x 185 x 27 mm 171 x 205 x 36 mm 637g 427g Operating Temperature 0C to 50C (32F to 122F) Storage Temperature -40C to 70C (-40F to 158F) Operating Humidity Storage Humidity 20% to 95% relative humidity, non-condensing 20% to 95% relative humidity, non-condensing 4. 3 Standard Conformance EMC Certification FCC Class B, CE 4. 4 Cable Specifications Ethernet Type 10BASE-T 100BASE-TX 1000BASE-T Cable Requirements Category 3 or better, UTP or STP Category 5 or better, UTP or STP Category 5e or better, UTP or STP Maximum Length 328 ft (100M) 328 ft (100M) 328 ft (100M) Caution: Please do not use telephone cables. Telephone cables do not support Ethernet or Fast Ethernet There are two types of cables: Straight Through Cables and Crossover Cables. [. . . ]