User manual SKIL 1840

[. . . ] Do not use any adapter plugs with earthed (grounded) power tools. Unmodifiedplugsandmatchingoutletswillreducerisk of electric shock. 7 b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. [. . . ] d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Looseclothes, jewelleryorlong haircanbecaughtinmovingparts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. 4) POWER TOOL USE AND CARE a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Suchpreventivesafetymeasuresreduce the risk of starting the power tool accidentally. d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g) Use the power tool, accessories and tool bits etc. , in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5) SERVICE a) Have your power tool serviced by a qualified repair person using only identical replacement parts. [. . . ] re-adjust the routing depth after having changed router bits · Speedcontrol7 For optimal routing results on different materials - select routing speed with wheel J (also while tool is running) - use table 8 as reference for determining the right routing speed - beforestartingajob, findtheoptimalspeedby testing out on spare material !protect yourself against the effects of vibration by maintaining the tool and its accessories, keeping your hands warm, and organizing your work patterns SECURITE INSTRUCTIONS GENERALES DE SECURITE ATTENTION!Lisez tous les avertissements de sécurité et toutes les instructions. Nepassuivreles avertissementsetinstructionspeutentraînerunchoc électrique, unincendieet/oudegravesblessuressurles personnes. Conservez tous les avertissements et toutes les instructions pour pouvoir s'y reporter ultérieurement. [. . . ]