User manual SKIL 2895

[. . . ] Failure to follow all instructions listed below may In all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. [. . . ] FORWARD/REVERSING LEVER & TRIGGER LOCK lock trigger in WARNING After tool use, to help prevent ! "OFF" position accidental starts and accidental discharge. Your tool is equipped with a forward/ reversing lever and trigger lock located above the trigger (Fig. For forward rotation, (with chuck pointed away from you) move the lever to the far left. for reverse rotation move the lever to the far right. To activate trigger lock move lever to the center off position. Do not change direction of rotation until the tool comes to a complete stop. Shifting during rotation of the chuck can cause damage to the tool. bRAKE When the trigger switch is released it activates the brake to stop the chuck quickly. This is especially useful in the repetitive driving and removal of screws. gEAR SHIFTING Your tool is equipped with two separate gear ranges , Hi-torque and High-speed. Hi-torque provides high-torque and slower drilling speeds for heavy duty work or for driving screws. The handle can be positioned on either side of the tool. To mount, insert mounting bolt into mounting hole, and simply thread handle onto bolt until tight. BATTERY CHARGED CONDITION INDICATOR The battery is equipped with a charged condition indicator (Fig. The indicator lights shows the charged condition of the battery during the working process. By pressing the battery fuel indicator button, the charged condition can also be checked when the battery is removed or when the machine is not in use. When all five lights are illuminated, this indicates the batter pack is fully charged. When only three lights illuminate, this indicates the battery pack is partially charged. â· When only one light illuminates, this indicates the battery pack is slightly charged. When no lights illuminate, this indicates the battery pack is completely discharged. The drill " " position will lock up the clutch to permit drilling and driving heavyduty work, and also enables bits to be changed quickly and easily in the keyless chuck. [. . . ] Hole saws are Ideal for use with lock installation kits for 2-1/8" deadbolts or locksets with 15/16" or 1" latch hole in wooden and composition doors. Preventive maintenance performed by unauthorized personnel may result in misplacing of internal wires and components which could cause serious hazard. we recommend that all tool service be performed by a Skil Factory Service Center or Authorized Skil Service Station. SERVICEMEN: Disconnect tool and/or charger from power source before servicing. [. . . ]