User manual SKIL 4381

[. . . ] B) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. C) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. [. . . ] Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. D) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. This enables better control of the power tool in unexpected situations. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. G) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. 4) POWER TOOL USE AND CARE a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. sawing mode ? Selecting sawing mode 9 - ?EXACT?for accurate cutting, straight + curved - ?TURBO?when sawing splintersensitive material ? Adjusting sawing speed to material used 0 !If the tool does not run with wheel D in position 1, select a higher sawing speed and lower the sawing speed while the tool runs ? Dust suction !Do not use vacuum cleaner when cutting metal ? Dust blowing !B ? Operating the tool - before switching on the tool, ensure that front end of footplate rests flat on the workpiece - hold tool firmly with both hands, so you will have full control of the tool at all times !While working, always hold the tool at the grey-coloured grip area(s) @ 9 - ensure that complete surface of footplate rests firmly on the workpiece !Ensure that the blade has come to a complete standstill, before you lift the tool from the workpiece - keep ventilation slots F 2 uncovered ? Cable clip # ? Technical file at: SKIL Europe BV (PT-SEU/ENG1), 4825 BD Breda, NL APPLICATION ADVICE ? Use the appropriate saw blades $ !Tool accepts most commonly available T-shank and U-shank blades % ? When cutting metals, lubricate saw blade regularly with oil ? For an accurate straight cut, guide tool with footplate along the edge of a straight piece of wood ^ ? Pre-drill a hole before making cut-outs & ? Splinter-free cutting - cover cutting-line with several layers of wide tape before cutting - always face the good side of the workpiece down ? For more tips see www. 2014 NOISE/VIBRATION ? Measured in accordance with EN 60745 the sound pressure level of this tool is 96 dB(A) and the sound power level 107 dB(A) (standard deviation: 3 dB), and the vibration ?0 m/s ? The vibration emission level has been measured in accordance with a standardised test given in EN 60745; it may be used to compare one tool with another and as a preliminary assessment of exposure to vibration when using the tool for the applications mentioned - using the tool for different applications, or with different or poorly maintained accessories, may significantly increase the exposure level - the times when the tool is switched off or when it is running but not actually doing the job, may significantly reduce the exposure level ! [. . . ] Bruk av personlig sikkerhetsutstyr som stvmaske, sklifaste arbeidssko, hjelm eller hrselvern ?avhengig av type og bruk av elektroverktyet ?Stv fra eik og bk), spesielt sammen med tilsetningsstoffer for trebehandling; bruk stvmaske og arbeid med stvfjerningsutstyr nr det er mulig ? Flg de nasjonale krav, nr det gjelder stv for de materialer du nsker arbeide med ? Bruk helt utrullet og sikker skjteledning med en kapasitet p 16 A ? Ta alltid ut kontakten fr du forandrer innstillinger p sagen eller skifter tilbehr FR BRUK ? Rydd unna alle hindringer i arbeidsomrdet fr du begynner sage ? Ung skade p. Skruer, spiker eller andre elementer i arbeidsstykket; fjernes fr man starter jobben ? Sett fast arbeidsstykket (et arbeidsstykke som er sikret med klemmer, sitter sikrere enn om det holdes fast for hnd) UNDER BRUK ? Hold elektroverktyet p de isolerte gripeflatene, hvis du utfrer arbeid der innsatstilbehret kan treffe p skjulte strmledninger eller den egne strmledningen (kontakt med en spenningsfrende ledning kan ogs sette elektroverktyets metalldeler under spenning og fre til elektriske stt) ? Hold alltid kabelen borte fra bevegelige deler p verktyet; fr kabelen bakover bort fra verktyet ? Hvis kabelen skades eller kappes under arbeid m kabelen ikke berres, men stpselet straks trekkes ut ? Bruk ikke verktyet dersom kabel er skadet; f den skiftet ud af en anerkendt fagmand ? I tilfelle en elektrisk eller mekanisk svikt, skal verktyet med en gang sles av og stpslet trekkes ut ? Hold hendene unna sagbladet mens motoren er i gang TILBEHR ? SKIL kan kun garantere et feilfritt verkty dersom original-tilbehr brukes ? Bruk aldri skjevt, deformert eller slvt sagblad BRUK ? Nr verktyet skal brukes utendrs, m det koples til en feilstrmbryter (FI) feilstrmbryter som vil kople ut p 30 mA maksimum; det skal ogs bare brukes skjteledninger som er beregnet for bruk utendrs og som er utstyrt med sprutsikker stikkontakt ETTER BRUK ? Nr du setter bort verktyet m bryteren sles av, bevegelige deler m vre helt stoppet ? Av/p 4 ? Lsning av bryteren for permanent drift 5 ? Bladbytte 6 ! [. . . ]