User manual SKIL 7120

[. . . ] 2)ELECTRICALSAFETY a) Powertoolplugsmustmatchtheoutlet. Nevermodify thepluginanyway. Donotuseanyadapterplugs withearthed(grounded)powertools. Unmodified plugs and matching outlets will reduce risk of electric shock. b) Avoidbodycontactwithearthedorgrounded surfacessuchaspipes, radiators, rangesand refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c) Donotexposepowertoolstorainorwetconditions. [. . . ] Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. d) Removeanyadjustingkeyorwrenchbeforeturning thepowertoolon. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Donotoverreach. Keepproperfootingandbalance atalltimes. This enables better control of the power tool in unexpected situations. f) Dressproperly. Donotwearlooseclothingor jewellery. Keepyourhair, clothingandglovesaway frommovingparts. Loose clothes, jewellery or long hair can be caught in moving parts. g) Ifdevicesareprovidedfortheconnectionofdust extractionandcollectionfacilities, ensuretheseare connectedandproperlyused. Use of dust collection can reduce dust-related hazards. 4)POWERTOOLUSEANDCARE a) Donotforcethepowertool. Usethecorrectpower toolforyourapplication. The correct power tool will do the job better and safer at the rate for which it was designed. b) Donotusethepowertooliftheswitchdoesnotturn itonandoff. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c) Disconnecttheplugfromthepowersourceand/or thebatterypackfromthepowertoolbeforemaking anyadjustments, changingaccessories, orstoring powertools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d) Storeidlepowertoolsoutofthereachofchildrenand donotallowpersonsunfamiliarwiththepowertoolor theseinstructionstooperatethepowertool. Power tools are dangerous in the hands of untrained users. e) Maintainpowertools. Checkformisalignmentor bindingofmovingparts, breakageofpartsandany otherconditionthatmayaffectthepowertool's operation. Ifdamaged, havethepowertoolrepaired beforeuse. [. . . ] perforationinsandingsheetshouldcorrespond withperforationinsandingfoot !replacewornsandingsheetsintime - always use the orange foam pad (which is subject to wear and tear and as such excluded from the warranty) !alwaysusethetoolwiththetotalsandingsurface coveredwithsandingpaper - knock the dust out of the VELCRO material on the orange foam pad before mounting the sanding sheet - mount VELCRO sanding sheet as illustrated · Dust suction 5 - mount dustbox A/vacuum cleaner adapter B by sliding it onto tool as illustrated until it snap-locks - remove dustbox A/vacuum cleaner adapter B by pressing knob C and hold it in that position while pulling dustbox/vacuum cleaner adapter backwards - empty dustbox A regularly for optimal dust pick-up performance !donotusedustbox/vacuumcleanerwhen sandingmetal · On/off - switch on/off the tool by pushing switch D 2 forward/backwards ! [. . . ]