User manual SKIL 8201-CL

[. . . ] DO NOT place the laser tool in a position that may cause anyone to stare into the laser beam intentionally or unintentionally. aLWAYS position the laser tool securely. Damage to the laser tool and/or serious injury to the user could result if the laser tool fails. ALWAYS use only the accessories that are recommended by the manufacturer of your laser tool. [. . . ] Tools are dangerous in the hands of untrained users. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the operation. Many accidents are caused by poorly maintained tools. , in accordance with these instructions and in the manner intended for the particular type of tool, taking into account the working conditions and the work to be performed. Use of the tool for operations different from those intended could result in a hazardous situation. Service Have your tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the tool is maintained. develop a periodic maintenance schedule for tool. When cleaning a tool be careful not to disassemble any portion of the tool since internal wires may be misplaced or pinched or may be improperly mounted. Inserting/Replacing the Battery ALWAYS turn off the laser and the main power switch before removing and replacing the batteries. Remove the battery cover by sliding it towards the bottom of the instrument. When inserting, pay attention to the correct polarity according to the representation on the inside of the battery compartment. always replace all batteries at the same time. Only use batteries from one brand and with the identical capacity. â· Remove the batteries from the tool when not using it for extended periods. When storing for extended periods, the batteries can corrode and discharge themselves. 1 2 3 4 5 Power switch Laser mode indicator (LED) Laser aperture Battery compartment 1/4-20 tripod mount Other Features (not shown) 6 Laser warning label 7 Protective case* 8 Tripod* *The accessories illustrated or described are not included as standard delivery. Protect the tool against moisture and direct sun irradiation. As an example, do not leave it in vehicles for longer periods. In case of large variations in temperature, allow the tool to adjust to the ambient temperature before putting it into operation. Avoid heavy impact or and prevent the tool from falling. After heavy exterior impact on the tool, an accuracy check should always be carried out before continuing to work (see "Leveling Accuracy"). [. . . ] Do not use any cleaning agents or solvents. Regularly clean the surfaces at the exit opening of the laser in particular, and pay attention to any fluff of fibers. If the tool should fail despite the care taken in manufacturing and testing procedures, repair should be carried out by an authorized aftersales service center for SKIL power tools. In all correspondence and spare parts orders, please always include the 10-digit article number given on the type plate of the tool. [. . . ]