User manual SKODA CAR RADIO BEAT FOR FABIA

[. . . ] Through this it is automatically decoded (convenience coding). A manual entry of the code is normally not necessary. Enter code Using the display Carefully handle the display because dents and scratches can occur through pressure of the finger or contact with sharp objects. The display can be cleaned with a soft cloth and finger marks can be wiped away with pure alcohol. ­ Switch on the radio if the ignition is on. ­ Enter the safety code using the station keys 1 - 4 . [. . . ] 2 ­ Confirm the changed setting by turning the button A. 2 ­ By pressing the button A for some considerable time or 30 seconds after the setting, the set values are automatically stored and the unit returns to the normal mode. Audio settings Setting the bass ­ Press the button , BASS appears in the display. 2 ­ Set the desired value by turning the button A. Setting treble ­ Press the button , TRE appears in the display. 2 ­ Set the desired value by turning the button A. GALA Your radio increases automatically its volume with the increasing vehicle speed. A higher setting value results in a stronger volume increase. ON VOL Your radio stores the last volume set before switching off. If the value is higher, the volume is reduced to the value of the parameter ON VOL after switching on the radio again. PHONE If your vehicle is equipped with a handsfree system, you can switch on or off the monophone play function of the mobile phone calls via the loudspeakers of the vehicle. AUX Switching on or off the functions of the external audio source. You can set the desired value in the range of LEV1 to LEV3. If you set the value OFF, the tone is not replayed from the external audio source. BEEP Switching on or off the tone signal when storing the radio stations. By pressing again the button or 5 seconds after the setting, the set values are stored and the radio returns to the normal mode. Adjusting volume ratio Balance ­ By pressing the button repetitively, BAL appears in the display. 2 ­ You can set with the button A the desired value of the volume ratio between the left and right side. Fader ­ Press the button once again, FAD appears in the display. 2 ­ You can set with the button A the desired value of the volume ratio between the front and the rear. By pressing again the button or 5 seconds after the setting, the set values are stored and the radio returns to the normal mode. Radio CD Play function of the CD tack (tracks) in continuous or random order. If you select PLAY, the tracks are replayed in normal order. If you select SCHFFL (Schuffle), the tracks are replayed in random order. LOUD In case of low volume level, the function reinforces the range of bass and treble frequencies. 5 Function SCAN ­ The radio station of the current waveband is briefly played (10 2 seconds) by pressing the button A briefly. 2 ­ This function is ended by pressing the button A once again and the current station is replayed. Store station 3 ­ After selecting the radio station, hold the station key A, on which it should be stored until it briefly switches to mute and a brief signal sounds. Note Each setting change is stored by changing to another menu point. Radio mode Waveband switch-over Your radio is fitted with the wavebands FM and AM, in order to change, press the button AM/FM for a considerable time. In the ranges FM1/AM1 and FM2/AM2 there are each 6 memory spaces available, in order to change, press the button AM/FM briefly. Automatic station finding with storing the radio stations ­ Press the button AS . An automatic station finding is started during which the 6 stations with the strongest signal in the memory level FM2 and/or AM2 are stored. This applies only to the wavebands FM2 and AM2. 3 When storing the radio stations on the station keys A is finished, you can call up 3 the desired radio station by pressing a station key A. Note The process of searching for and storing the radio stations Manual search ­ Search the frequency of the desired radio station by pressing the 2 button A. Automatic station finding SEEK ­ The radio searches for the next radio station in the selected waveband by pressing the button or . The stored radio stations are updated and stored once again by repetitively pressing the button AS . Radio text Certain radio stations transmit additional text information - called radio text. Note The text information must not be available to all radio stations. · 6 Radio · Depending upon the quality of the received signal, the radio needs a specific time, in order to correctly read all the illustrated characters. Select track 2 ­ During the CD play function turn the button A to the left or to the right, in order to select the previous or the next track. Traffic reports Activating and deactivating the traffic information Press the button TP , TP appears in the display. If a set radio station does not transmit a traffic report, the radio searches for a station which transmits the traffic report. If no radio station which transmits the traffic reports is found, NO TP is shown on the display. [. . . ] This can effect the CD jump or impair the play function. In such cases wait until the moisture has dissipated. Notes for the care of the CDs If a CD is soiled, please never clean the CD in the direction of a circle but rather with a soft fluffly cloth from inside to outside. In case of severe layers of dirt we recommend to clean the CD with a commercially available CD cleaner. [. . . ]