Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SMART DEVICES MN610. We hope that this SMART DEVICES MN610 user guide will be useful to you.
Lastmanuals help download the user guide SMART DEVICES MN610.
Manual abstract: user guide SMART DEVICES MN610REV A
Detailed instructions for use are in the User's Guide.
[. . . ] RETURN POLICY: Factory authorization MUST be obtained before returning any product. A 15% restocking charge will be issued on unused equipment (in original box) that is returned for credit. Credit is issued to the dealers account. [. . . ] 1/4" front panel headphone jack.
· · ·
·
·
USER'S GUIDE
5
INSTALLATION
1. Mount the MN610 in a convenient 3 1/2" rack space using four rack bolts. Ideally, the monitor should be located between the processor and the amplifiers. Using shielded pair wire, connect the outputs of the processor to the appropriate inputs on the monitor. For balanced outputs, tie the positive (+) terminal of the processor to the positive (+) terminal on the monitor, and tie the negative (-) terminal of the processor to the negative (-) terminal on the monitor. For unbalanced outputs, use the ground terminal (GND, E) on the processor to tie to the negative (-) terminal on the monitor. Tie the shield of the cable to the ground (GND, E) at the processor, leaving the shield unconnected at the monitor. Alternatively, if the processor has a THX Standard output for monitoring, connect the DB25 cable to the appropriate jacks on the processor and monitor. Do NOT apply signal to both the terminal block and DB25 connector inputs for the same signal. LEFT REAR, RIGHT REAR, and any MID or HI frequency terminal block inputs may be safely used in conjunction with the DB25 connector.
6
MN610 10 CHANNEL BOOTH MONITOR
THX Standard DB25 Pinouts 3. Using unshielded pair wire, connect the Signal Pin outputs of the Left + 2 amplifier to the Left 14 appropriate inputs on Center + 5 the monitor. As with a Center 17 balanced processor, tie Right + 8 the positive (+) terminal Right 20 of the amplifier to the Left Wall + 23 positive (+) terminal of Left Wall 10 the monitor. Tie the Right Wall + 24 negative (-) terminal of Right Wall 11 the amplifier to the SubWoofer + 25 negative (-) terminal of SubWoofer 12 the monitor. Left Extra + 16 Single Frequency Left Extra 3 Band Monitoring. [. . . ] The main VOLUME knob controls the volume for all outputs. The SIGNAL LEVEL LEDs indicate the relative amplitude of monitored signals. The levels displayed are not calibrated to any standard audio measurement. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SMART DEVICES MN610
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SMART DEVICES MN610 will begin.
