User manual SMART DEVICES SR-1 PLUS INSTALLATION

[. . . ] 6 ACERT engine delivers more horsepower using significantly less fuel than the previous series engine. 6 ACERT engine features an aftertreatment regeneration solution that requires no operator intervention. The regeneration process automatically starts once the filtering system reaches a certain level ­ with no interruption to machine performance or the work process. 6 ACERT engine is equipped with an electroniccontrolled high-pressure fuel system that includes an electric priming pump and three-layer fuel hoses to allow the use of biodiesel (meeting ASTM 6751 or EN 14214) up to B20 (biodiesel 20% mixture). [. . . ] Comprehensive Product Support All Cat Work Tools are backed up by a world-wide network of well-stocked parts depots and highly experienced service and support personnel. 9 2 1 3 Integrated Technologies Cat® Grade Control Depth and Slope Solutions that make work easier and more efficient This optional system combines traditional machine control and guidance with standard factory-installed and calibrated components, making the system ready to go to work the moment it leaves the factory. The system utilizes internal front linkage sensors ­ well protected from the harsh working environment ­ to give operators real-time bucket tip position information through the cab monitor (1), which minimizes the need and cost for traditional grade checking and improves job site safety. It also helps the operator complete jobs in fewer cycles, which means less fuel use. Cat dealers can upgrade the system to full threedimensional control by adding proven Cat AccuGradeTM positioning technologies, including GPS and Universal Total Station (UTS). Cat Product Link This optional system is deeply integrated into the machine monitoring system and is designed to help customers improve their overall fleet management effectiveness. Events and diagnostic codes as well as hours, fuel consumption, idle time, machine location, and other detailed information are transmitted to a secure web based application (2 and 3) called VisionLinkTM, which uses powerful tools to communicate to users and dealers. 10 Serviceability Service Doors Fast, easy and safe access built in Wide service doors and a one-piece hood (1) provide easy access to the engine and cooling compartments. Both doors and hood feature enhanced hardware and a new screen design to help minimize debris entry. compartments The pump (2) , radiator (3) , and air cleaner compartments provide ample access to major components and regular service items like fuel and oil filters. The fresh air filter is located on the side of the cab to make it easy to reach and replace as needed. The cartridge-style spin-on housing enables the internal filter to be separated and replaced; the used internal element can be incinerated to help reduce waste. The 320E is an efficient, productive machine that's designed to conserve our natural resources for generations ahead. 8 gal Weights Minimum 21 500 kg Operating Weight* Maximum 24 730 kg Operating Weight** 47, 400 lb 54, 450 lb Track Number of Shoes (each side) Long Undercarriage 49 pieces Number of Track Rollers (each side) Long Undercarriage 8 pieces Number of Carrier Rollers (each side) Long Undercarriage 2 pieces *HD 5. When properly installed and maintained, the cab offered by Caterpillar, when tested with doors and windows closed according to ANSI/SAE J1166 OCT98, meets OSHA and MSHA requirements for operator sound exposure limits in effect at time of manufacture. ⷠHearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environment. 28 m (20'6")*** mm (ft) 3180 (10'4") 3240 (10'8") 3150 (10'3") 14 070 (46'2") 2830 (9'3") 3650 (12'0") 4460 (14'6") 450 (1'6") 2380 (7'10") 2980 (9'9") 3170 (10'5") 2960 (9'9") 3150 (10'3") 1020 (3'4") 6 7 8 1 Shipping Height Shipping Height with Guard Rail Shipping Height with Top Guard 2 Shipping Length 3 Tail Swing Radius 4 Length to Center of Rollers 5 Track Length 6 Ground Clearance 7 Track Gauge 8 Transport Width 600 mm (24") Shoes 790 mm (31") Shoes 9 Cab Height Cab Height with Top Guard 10 Counterweight Clearance *Cat 900 mm (36"), 0. 17 SR-1 PLUS Hydraulic Excavator Specifications Major Component Weights kg 11 300 7850 3550 4600 5400 1720 2010 1730 2020 2400 930 680 840 690 850 1240 2700 3360 3800 420 650 930 lb 24, 920 17, 300 7, 830 10, 140 11, 910 3, 790 4, 430 3, 810 4, 450 5, 290 2, 060 1, 510 1, 850 1, 530 1, 870 2, 740 5, 940 7, 410 8, 370 920 1, 420 2, 050 Base Machine (with boom cylinder, without counterweight, front linkage and track) Long Undercarriage Counterweight 3. 9 ton) Heavy Boom (includes lines, pins and stick cylinder) Boom HD ­ 5. 9B1 (9'6") ES for CGC Super Long Reach Track Shoe (Long/per two tracks) 600 mm (24") Triple Grouser 790 mm (31") Triple Grouser 790 mm (31") Triple Grouser HD Quick Coupler Center-Lock 252 Buckets B1 900 mm (36") GD 347-6707 SAE 0. 56 yd3) Base machine includes 75 kg (165 lb) operator weight, 90% fuel weight, and undercarriage with center guard. All weights are rounded up to nearest 10 kg and lb except for quick coupler and buckets. [. . . ] Use of work tools, including buckets, which are outside of Caterpillar's recommendations or specifications for weight, dimensions, flows, pressures, etc. May result in less-than-optimal performance, including but not limited to reductions in production, stability, reliability, and component durability. Improper use of a work tool resulting in sweeping, prying, twisting and/or catching of heavy loads will reduce the life of the boom and stick. 80 kg 618 710 786 847 925 1002 649 747 825 879 970 1051 693 801 887 962 1051 341 289 Weight lb 1, 363 1, 566 1, 733 1, 867 2, 038 2, 209 1, 430 1, 647 1, 818 1, 937 2, 138 2, 316 1, 527 1, 765 1, 955 2, 121 2, 316 751 637 Fill % 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% 90% 90% 90% 90% 90% 100% 100% kg lb 3820 8, 419 Maximum Material Density: 2100 kg/m3 (3, 500 lb/yd3) The above loads are in compliance with hydraulic excavator standard EN474, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity with front linkage fully extended at ground line with bucket curled. [. . . ]