User manual SMART DEVICES SR 135

[. . . ] Page 5 Versatility The oscillating front and rear wheels seek out and compact soft spots. The oscillating wheels also provide even wheel loads and uniform compaction across the rolling width. Page 5 Serviceability The one-piece fiberglass hood tilts upward to allow access to the engine and daily maintenance points. Daily check points are accessible from ground level. [. . . ] Hydraulic motors, secondary brakes and drive lines are positioned high inside the machine frame, limiting contamination and damage. Two speed ranges provide job site mobility and traction capability to suit working conditions. Speed ranges can be shifted while propelling. Remote drive train flushing system provides cool hydraulic oil to the brakes and axles to provide extended drive train life. Streamlined gauges keep operator informed of engine systems and machine status. Optional rotating operator's station allows operator to swivel control console from left side to right side for even better visibility. Tire Overlap/Wheel Oscillation Tires overlap and wheels oscillate for maximum compactive effort with each pass. 4 degrees to allow uniform compaction across entire rolling width. (Note: With the 11-wheel option, oscillation angle on outside rear wheels is 0 degrees up and 4. Large engine enclosure pivots upward for access to engine. Single-point access to all engine service points and filters is through the engine enclosure. Machine instrumentation and most controls are located at the operator's right on the control console. This includes the propel lever, speed selector switch, water system control, horn and secondary brake switch. System includes galvanized distribution bars over the front and rear tires and retractable nylon tire scrapers for each tire. A polyethylene water tank is located at the front of the machine on the operator's platform. A water level gauge is on the tank within easy sight of the operator. Operator and Machine Protective Equipment The Roll Over Protective Structure (ROPS) is a two-post structure that bolts directly onto flanges welded to the machine frame. 8 SR 135 specifications Dimensions A B C D E F G Length Compaction width Height at steering wheel Height at ROPS Wheel base Ground clearance Tire overlap Outside turning radius Inside turning radius Oscillation angle SR 135 4. Operating Weights Model C o n d i t i o n Wheel SR 135 Standard machine empty Maximum water ballast Maximum wet sand ballast P S 1 5 0 C w / 11-Wheel Option Standard machine empty Maximum water ballast Maximum wet sand ballast Standard machine empty Maximum water ballast Maximum wet sand ballast Iron and wet sand ballast SR 135 w/Heavy Weight Option and 11-Wheel Option Standard machine empty Maximum water ballast Maximum wet sand ballast -- 3825 kg 8055 kg -- 8, 430 lb 17, 760 lb 5025 kg 8850 kg 11, 078 lb 19, 511 lb 457 kg 805 kg 1189 kg 1, 008 lb 1, 775 lb 2, 621 lb -- 3825 kg 8055 kg -- 3825 kg 8055 kg -- 8, 430 lb 17, 760 lb -- 8, 430 lb 17, 760 lb 4955 kg 8780 kg 10, 925 lb 19, 355 lb 450 kg 798 kg 1183 kg 551 kg 970 kg 1440 kg 1920 kg 993 lb 1, 760 lb 2, 608 lb 1, 214 lb 2, 145 lb 3, 180 lb 4, 222 lb -- 3825 kg 8055 kg -- 8, 430 lb 17, 760 lb 4885 kg 8710 kg 10, 775 lb 19, 205 lb 545 kg 970 kg 1440 kg 1, 200 lb 2, 145 lb 3, 180 lb We i g h t o f B a l l a s t To t a l We i g h t Average We i g h t p e 12 940 kg 28, 535 lb 13 010 kg 28, 685 lb 4955 kg 8780 kg 10, 925 lb 19, 355 lb SR 135 w/Heavy Weight Option 13 010 kg 28, 685 lb 17 273 kg 38, 000 lb With 12 307 kg (27, 075 lb)12 307 kg 27, 075 lb 13 080 kg 28, 836 lb Ballast Compartments Ballast compartments are positioned with sealed. A calculated balance of wheel to weight Sand and steel ballast can be removed ratio. Internal-frame baffles help prevent through a bolt-on side cover and water surges when water ballasted. Ballast can be emptied through a drain Sand and steel ballast can be added port. [. . . ] 50 x 15 Tires Actual Ground Contact Pressures are measured across the width of the tire. tire Inflation Pressures 344 kPa (50 psi) 276 kPa (40 psi) 482 kPa (70 psi) 345 kPa (50 psi) 619 kPa (90 psi) 414 kPa (60 psi) 757 kPa (110 psi) 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 0 69 138 207 276 345 414 483 552 621 689 758 827 896 965 1034 Ground Contact Pressures (psi) 970 kg (2 , 145 lb) Wheel Load ­ Maximum water ballast 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 0 69 138 207 276 345 414 483 552 621 689 758 827 896 965 1034 Ground Contact Pressures (psi) 1440 kg (3 , 180 lb) Wheel Load ­ Maximum wet sand ballast 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 0 69 138 207 276 345 414 483 552 621 689 758 827 896 965 1034 1920 kg (4 , 220 lb) Wheel Load ­ Maximum iron and wet sand ballast , SR 135 w/Heavy Weight Ground Contact Pressures (psi) SR 135 specifications Ground Contact Pressures (kPa) 13 Ground Contact Pressures (kPa) Ground Contact Pressures (kPa) Actual Ground Contact Pressures for 14-Ply: 7. 50 x 15 Tires Actual Ground Contact Pressures are measured across the width of the tire. tire Inflation Pressures 344 (50 276 kPa (40 psi) 482 (70 345 kPa (50 psi) 619 (90 414 kPa (60 psi) 757 kPa (110 psi) 862 kPa (125 psi) 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 0 69 138 207 276 345 414 483 552 621 689 758 827 896 965 1034 970 kg (2 , 145 lb) Wheel Load ­ Maximum water ballast 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 0 69 138 207 276 345 414 483 552 621 689 758 827 896 965 1034 Ground Contact Pressures (psi) 1440 kg (3 , 180 lb) Wheel Load ­ Maximum wet sand ballast 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 0 69 138 207 276 345 414 483 552 621 689 758 827 896 965 1034 1920 kg (4 , 220 lb) Wheel Load ­ Maximum iron and wet sand ballast , SR 135 w/Heavy Weight 14 Ground Contact Pressures (psi) SR 135 specifications Ground Contact Pressures (kPa) Ground Contact Pressures (kPa) Ground Contact Pressures (psi) Ground Contact Pressures (kPa) Optional Equipment Note: Standard and optional equipment may vary. [. . . ]