User manual SMC 2209USB/ETH

[. . . ] Copyright Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SMC. [. . . ] Then reboot the machine and go through the installation process again. The system BIOS may not be USB compatible or your PC's USB settings may not be enabled. Check with the motherboard manufacturer on how to enable this setting in the BIOS. Also check for the latest BIOS upgrade and perform the update if necessary. You have tried swapping cables and confirmed that proper power is being supplied to your network switch/router and you still cannot get connected to the network. o You may need to configure the adapter to connect at a specific speed. In Windows 98 and Me, right-click Network Neighborhood or My Network Places. Click the "Configuration" tab. Double-click the SMC2209USB/ETH adapter, go the "Advanced" tab and select "Connection Type". On the right, change the option to "10BaseT (Twisted Pair)". Then click "OK" to exit and apply the changes. Try other connection types as well if the problem still exists. o In Windows 2000 and XP, right-click My Computer and click "Properties". Go to the "Hardware" tab and click "Device Manager". Double-click your SMC adapter and go to the "Advanced" tab. Change the "Connection Type" to "10BaseT (Twisted Pair)" and click "OK" to exit and apply the changes. Try other connection types as well if the problem still exists. · · · · 8 | Cable Types and Specifications Cable 10Base-T 100Base-TX Cable Types and Specifications Type Max. 5 100-ohm UTP 100 m (328ft) Connector RJ-45 RJ-45 Twisted-Pair Cable and Pin Assignments DO NOT plug a phone jack connector into any RJ-45 port. Use only twisted-pair cables with RJ-45 connectors that conform with FCC standards. For 10Base-T / 100Base-TX connections, a twisted-pair cable must have two pairs of wires. Each wire pair is identified by two different colors. For example, one wire might be red and the other red with white stripes. [. . . ] Medium Dependent Interface ­ X (crossed) - A port on a network hub or switch that crosses the transmit lines coming in to the receive lines going out. NAT ­ (Network Address Translation) This process allows all of the computers on your home network to use one IP address. The NAT capability of the Barricade, allows you to access the Internet from any computer on your home network without having to purchase more IP addresses from your ISP. Network Address Translation can be used to give multiple users access to the Internet with a single user account, or to map the local address for an IP server (such as Web or FTP) to a public address. [. . . ]