User manual SMC 7004AWBR

[. . . ] SMC Wireless BarricadeTM Routers User Guide SMC7004AWBR V1. 0 Hardware Installation 2. 1 Panel Layout 2. 1. 2. Rear Panel The rear panel features three 10/100 Mbps Ethernet ports and one Wide Area network (WAN) port. The WAN port connects your DSL or cable modem to the router. The LAN ports are used to connect to your computers or other network devices. 2. 1. 1. [. . . ] In the "Preferences" window, under "Category" double-click "Advanced", then click "Proxies". Select "Direct connection to the internet. " Click "OK. " English iii. Clear all the checkboxes and click "OK. " Click "OK" again to close the "Internet Options" window. 13. Repeat these steps for each computer connected to your Barricade. English Configuring Your Barricade If you connect to the Internet using a: Cable Modem, turn to page 13 DSL Modem, turn to page 15 DSL Modem with a Log In name and Password, turn to page 17 b. Click "Edit", then click "Preferences. . . " Configuring Your Barricade for a Cable Modem 1. Internet Explorer or Netscape Navigator). In the "Location" field (for Netscape) or "Address" field (for Internet Explorer), type "http://192. 168. 123. 254" and press <ENTER>. In the "System Status" page of the Barricade web console, type your password in the "System Password" field (default is "admin") and click the "Log In" button. 5. Under "WAN Type" Click the "Change. . . " button. 6. Select "Dynamic IP Address" and click the "Save" button. English English 7. Key in your "Host Name" if your Internet Service Provider has given you one (i. e. Click "Save", and then click the "Reboot" button. When prompted to reboot now, click "OK. " 10. Once the Barricade is rebooted, you can surf the Internet as you normally would from all computers connected to it. 4. Click "Primary Setup" Configuring Your Barricade for a DSL Modem 1. Internet Explorer or Netscape Navigator). Select "Static IP Address" and click the "Save" button. 2. In the "Location" field (for Netscape) or "Address" field (for Internet Explorer), type "http://192. 168. 123. 254" and press <ENTER>. In the spaces provided, key in the values provided to you by your ISP. (Note: Enter the IP Address given to you in the "WAN IP Address" field, not the "LAN IP Address" field. ) 3. In the "System Status" page of the Barricade web console, type your password in the "System Password" field (default is "admin") and click the "Log In" button. English English 4. Click "Save", and then click the "Reboot" button. 9. When prompted to reboot now, click "OK. " 5. Under "WAN Type" Click the "Change. . . " button. 10. [. . . ] Internet Explorer or Netscape Navigator). In the "Location" field (for Netscape) or "Address" field (for Internet Explorer), type "http://192. 168. 123. 254" and press <ENTER>. 6. Click "Save" and then click "Reboot. " 7. When prompted to reboot now, click "OK. " English English 3. [. . . ]