User manual SMC 7401BRA

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SMC 7401BRA. We hope that this SMC 7401BRA user guide will be useful to you.

Lastmanuals help download the user guide SMC 7401BRA.

Download

You may also download the following manuals related to this product:

SMC 7401BRA FICHE TECHNIQUE (200 ko)

Manual abstract: user guide SMC 7401BRA

Detailed instructions for use are in the User's Guide.

 [. . . ] Re-Burn FLASH with USB connection/Reset to factory Defaults 1 Power off the CPE,  remove case and short the jumper J4.  [. . . ] DO NOT power off the CPE while programming is still on going. Note: During the FLASH programming you will be asked for a Start and End MAC address. 6 After the FLASH programming has completed power OFF CPE. Note: Do not unplug the USB cable for the minute. 7 After power ON leave the CPE for 2 minutes. You will see the USB LED go out and hear a clicking sound. The CPE is now updated to the latest firmware & reset to factory defaults. Notes: If you run FLASH. BAT and the USB fails to initialise try on another USB port.  [. . . ] If you execute from an NTFS partition you may have problems.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SMC 7401BRA

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SMC 7401BRA will begin.