User manual SMC 7800A/VCP

[. . . ] TigerAccessTM EE Ethernet-over-VDSL2 CPE High-speed Internet access over existing phone lines Concurrent data/phone services over single connection Always-on digital connection provides quick initialization Seamless rate adaptation enhances quality in video applications Supports PC or Mac with Ethernet adapter card installed Installation Guide SMC7800A/VCP TigerAccess-EE CPE Installation Guide From SMC's Tiger line of feature-rich workgroup LAN solutions 20 Mason, Irvine, CA 92618 Phone: (949) 679-8000 February 2007 Pub. # 150200004100H Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. [. . . ] The temperature and humidity should be within the ranges listed in the specifications. Be sure that the CPE is also accessible for the Ethernet and telephone cabling. · · · 1-6 CHAPTER 2 HARDWARE DESCRIPTION Unpacking After unpacking this CPE, check the contents to be that sure you have received all the components. Then, before beginning the installation, be sure that you have all other necessary installation equipment. Please inform your dealer if there are any incorrect, missing, or damaged parts. If possible, retain the carton, including the original packing materials. Use them again to repack the product in case there is a need to return it for repair. 2-1 HARDWARE DESCRIPTION Front and Rear Panel This device is an external VDSL2 CPE for high-speed Internet access applications. The front panel of the CPE provides an array of system and port status indicators. The rear panel includes ports for the VDSL line, a 10/100 Mbps Ethernet connection to a computer, and an RJ-11 phone jack for connection to a telephone. The rear panel also includes a DC power input jack. The following figure shows the external components of the CPE: System Indicators Ethernet Status Port Link/Activity TigerAccess - EE CPE SMC7800A / VCP DIAG POWER SPEED DUPLEX VDSL LAN VDSL Port Phone Port DIP Switches Ethernet Port DC Power Jack Figure 2-1 Front and Rear Panels 2-2 SYSTEM AND PORT STATUS LEDS System and Port Status LEDs The CPE includes key system and port indications that simplify installation and network troubleshooting. The LEDs, which are located on the front panel for easy viewing, are described in the following table. Table 2-1 System and Port Status LEDs LED Status On Off On Off Flashing Description Power is being supplied to the CPE. A failure has been detected during bootup (including self-test failure or other problem). CPE successfully passed bootup diagnostics. Ethernet port is operating at full duplex. Ethernet port is operating at half duplex. VDSL port has a valid link with a VDSL switch. VDSL port has no link with a VDSL switch. VDSL port training connection to VDSL switch. Ethernet port has a valid link with attached device. Ethernet port has no link with other device. CPE is transmitting or receiving data on this port. System Status Indicators POWER DIAG* Port Status Indicators SPEED DUPLEX VDSL* On Off On Off On Off Flashing LAN On Off Flashing * These LEDs also turn on when firmware is being updated. 2-3 HARDWARE DESCRIPTION 2-4 CHAPTER 3 INSTALLATION Installation Overview Before installing the CPE, verify that you have all the items listed in the "Unpacking" on page 2-1. If any of the items are missing or damaged, contact your local distributor. [. . . ] The successor IEEE 802. 3 standard provides for integration into the OSI model and extends the physical layer and media with repeaters and implementations that operate on fiber, thin coax and twisted-pair cable. Fast Ethernet A 100 Mbps network communication system based on Ethernet and the CSMA/CD access method. Full Duplex Transmission method that allows two network devices to transmit and receive concurrently, effectively doubling the bandwidth of that link. ITU International Telecommunication Union ITU-T Telecommunication Standardization Section of ITU LAN Segment Separate LAN or collision domain. [. . . ]