User manual SMC 7904WBRA-N

[. . . ] ADSL2 Barricade N Draft 11n Wireless 4-port Annex A ADSL2/2+ Modem Router SMC7904WBRA-N Router with built-in ADSL2/2+ Modem From SMC's line of award-winning connectivity solutions 20 Mason Irvine, CA 92618 Phone: (949) 679-8000 May 2008 R. 02 F/W 0. 11 Information furnished is believed to be accurate and reliable. However, no responsibility is assumed by our company for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of our company. We reserve the right to change specifications at any time without notice. [. . . ] Configures the Internet connection settings. Sets the TCP/IP configuration for the Barricade LAN interface and DHCP clients. Configures Address Mapping, virtual server and special applications. Sets the routing parameters and displays the current routing table. Configures a variety of security and specialized functions including: Access Control, URL blocking, Internet access control scheduling, intruder detection, and DMZ. Community string and trap server settings. Enable/disable the Universal Plug and Play function. Sets the ADSL operation type and shows the ADSL status. Configures Dynamic DNS function. WAN LAN Wireless NAT Routing Firewall SNMP UPnP ADSL DDNS 4-17 CONFIGURING THE BARRICADE Menu Tools Description Contains options to backup & restore the current configuration, restore all configuration settings to the factory defaults, update system firmware, or reset the system. Provides WAN connection type and status, firmware and hardware version numbers, system IP settings, as well as DHCP, NAT, and firewall information. Displays the number of attached clients, the firmware versions, the physical MAC address for each media interface, and the hardware version and serial number. Shows the security and DHCP client log. Status 4-18 CONFIGURATION PARAMETERS System Time Zone Select your local time zone from the drop down menu. This information is used for log entries and client filtering. For accurate timing of log entries and system events, you need to set the time zone. Select your time zone from the drop down menu. If daylight savings is used in your area, check the box to enable the function, and select the start/end dates. If you want to automatically synchronize the ADSL router with a public time server, check the Enable Automatic Time Server Maintenance box. Select the desired servers from the drop down menu. 4-19 CONFIGURING THE BARRICADE Password Settings Use this screen to change the password for accessing the management interface. Passwords can contain from 3~12 alphanumeric characters and are case sensitive. Note: If you lost the password, or you cannot gain access to the user interface, press the blue reset button on the rear panel, holding it down for at least 10 seconds to restore the factory defaults. The default password is "smcadmin". Enter a maximum Idle Time Out (in minutes) to define a maximum period of time for which the login session is maintained during inactivity. If the connection is inactive for longer than the maximum idle time, it will perform system logout, and you have to log in again to access the management interface. (Default: 10 minutes) 4-20 CONFIGURATION PARAMETERS Remote Management By default, management access is only available to users on your local network. [. . . ] Disable the security authentication manually. - Click on Wireless Network Connection/change advanced settings of the client PC. - Click on the Wireless Networks, choose the appropriate wireless network name, and click Properties. - Click Authentication and uncheck the Enable IEEE 802. 1X authentication for this network. [. . . ]