User manual SMC 7904WBRAS-N

[. . . ] USER GUIDE SMC7904WBRAS-N Copyright Information furnished is believed to be accurate and reliable. However, no responsibility is assumed by our company for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of our company. We reserve the right to change specifications at any time without notice. Copyright © 2009 by SMC Networks, Inc. [. . . ] SSID is used to distinguish different wireless networks. If you select Invisible, the AP is hidden and the terminal cannot obtain the SSID through passive scanning. Select whether users of the AP can communicate with each other. You can select Off or User Isolation Disable WMM Advertise Max Clients SSID-1--3 Enable Wireless Guest Network SSID Select or deselect the check box to enable or disable the wireless interface. Similar to the primary SSID, it identifies a wireless AP. On indicates that computers connected to the device cannot communicate with each other. Set the maximum number of clients that can be connected to the AP at the same time. Select the transmission rate of the wireless network from the drop-down list. Select the multicast transmission rate of the wireless network from the drop-down list. Select the power for data transmission from the drop-down list. You can select 100%, 80%, 60%, 40%, or 20%. By default, the wireless beacon frame sends the data once every 100ms. Its value range is 0--2347 and the default value is 2346. Its value range is 256--2346 and the default value is 2345. Data beacon proportion (transmission quantity indication). Its value range is 1--255 and the default value is 100. Select the preamble code from the drop-down list. Description These settings are applicable only for more technically advanced users who have sufficient knowledge about wireless LAN. Do not change these settings unless you know the effect of changes on the device. Click Apply to save the settings. 29 3. 3. 1. 2 MAC Filtering In the ADVANCED WIRELESS page, click MAC Filtering. The page as shown in the following figure appears: Click Add and the page as shown in the following figure appears: The following table describes the parameters in this page. Field User Name Current PC's MAC Address Other MAC Address Schedule Manual Schedule Description Enter the name that identifies your configuration. Enter the MAC address of the computer that connects to the device. [. . . ] If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. [. . . ]