User manual SMC 7904WBRB4

[. . . ] EZ Connect N ADSL2 BARRICADE TM Draft 11nWireless Annex B Adapter 4-Ports Wireless USB2. 0 ADSL/ADSL2 Modem Router SMC7904WBRB4 54Mbps Wireless Router with built-in ADSL Modem From SMC's line of award-winning connectivity solutions March 2009 R. 01 f/w 1. 0 Copyright Information furnished is believed to be accurate and reliable. However, no responsibility is assumed by our company for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of our company. We reserve the right to change specifications at any time without notice. Copyright © 2009 by SMC Networks, Inc. [. . . ] After modifying the MAC address and IP address, click it to save the settings. Delete Assigned IP Close MAC-based Assignment Table Select a row in the MAC-base Assignment Table, and click it. It shows the assigned IP address based on the MAC address. 3. 5 WLAN In the navigation bar, click WLAN. The WLAN page that is displayed contains Basic Settings, Security, Advance Settings, Access Control, and WDS Settings. 3. 5. 1 Basic Settings Choose WLAN > Basic Settings, and the page as shown in the following figure appears. In this page, you can configure the parameters for wireless LAN clients that may connect to your access point. The following table describes the parameters and buttons in this page: Field Disable Interface Band Mode Wireless LAN Description Select the checkbox, you can not configure the parameters in this page. You can select 2. 4 GHz (B), 2. 4 GHz (G), or 2. 4 GHz (B+G). Select the WLAN mode of the router, which is varied according to the software. By defaut, the WLAN mode of the router is AP. The service set identification (SSID) is a unique name to identify the router in the (Root) SSID Set VSSID wireless LAN. Wireless stations associating to the router must have the same SSID. Click it, the Virtual SSID Setting page appears. In this page, you can enable up to 24 Field 4 VSSIDs. SSID Country/Area Enable or disnable SSID. Description Select the country in which area you are from the drop-down list. A channel is the radio frequency used by 802. 11b/g wireless device. Channels available depend on your geographical area. You may have a choice of channels (for your region) and you should use a different channel from an adjacent AP to reduce the interference. Interference and degrading performance occurs when radio signal from diffirent APs overlap. Select a channel from the drop-down list box. Select the transmission rate of the wireless data. Channel Number Send Rate You can select Auto, 1 M, 2 M, 5. 5 M, 11 M, 6 M, 9 M, 12 M, 18 M, 24 M, 36 M, 48 M, or 54 M. Select the transmission power of the radio signal from the drop-down list. It is recommended to select the default value 100%. Radio Power (mW) Click Set VSSID, and the page as shown in the following figure appears. The following table describes the parameters in this page: Field Enable SSID Auth Type Description Select the checkbox to enable virtual access point (VAP). You need to enable VAP, if you want to configure the parameters in this page. The service set identification (SSID) is a unique name to identify the router in the wireless LAN Select the authentication mode of the router from the drop-down list. [. . . ] If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. [. . . ]