User manual SMC 9452TX-1

[. . . ] Copyrights Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SMC. [. . . ] Click the [Next >] button to begin the installation. Step 2: Insert the Driver CD and select the [Search for a suitable driver. . . ] option. Step 3: Clear all checkboxes except for [Specify a location]. Then click [Next >]. Step 4: You will then be prompted to enter the location of the drivers. In most cases, this is D. ) Then click [OK]. You can also click [Browse] and browse to the location of the drivers on the CD for further verification. Step 5: The system should find the drivers. Click the [Next >] button to continue the installation. (Note: If the system could not find the drivers, click the [< Back] button, and select the [Display a list of the known drivers. . . ] option. Select [Network Adapters] from the list of devices, press [Have Disk] and once again browse to the location of the drivers) Step 6: You have now completed the driver installation. Click [Finish] to initialize the adapter. 17 Windows XP Step 1: After you have inserted the SMC9452TX-1 PCI Card in your machine and turned it back on, the Operating System will automatically recognize and install the adapter using the drivers built-into Windows XP. If you wish to upgrade to the latest drivers available on the CD-ROM, please continue and read the directions below. Step 2: Click [Start] and click [Control Panel]. Then click the [Performance and Maintenance] icon and select [System]. Click the [Hardware] tab and click [Device Manager]. (Note: If the adapter was not installed properly, you may see "PCI Ethernet Controller" instead. Double-click on that device. ) 18 19 Step 3: Go to the [Driver] tab and click [Update Driver]. Select the [Install from a list. . . ] option and click [Next >]. Select the [Don't Search] option and click [Next >]. 20 21 Click [Have Disk] and browse to the location of the drivers on the CD. In most cases, this is D. ) Then click [OK]. 22 Step 4: The correct model of your SMC adapter will now be displayed. This process will be completed once the drivers are copied to the hard drive and installed. Please click [Finish] to exit the wizard. 23 Driver Verification Windows 95/98/Me Step 1: Right-click the My Computer icon on your desktop and click [Properties]. [. . . ] It is made up of servers, workstations, a network operating system and a communications link. Servers are high-speed machines that hold programs and data shared by network users. The workstations (clients) are the users' personal computers, which perform stand-alone processing and access the network servers as required. LAN Segment: Separate LAN or collision domain. [. . . ]