User manual SMC SMC2621W-U

[. . . ] SMC2621W-P SMC2621W-U Wireless Print Server SMC2621W-P SMC2621W-U User Guide From SMC's line of award-winning connectivity solutions October 2003 Table of contents Chapter 1 Introduction . 9 Chapter 3 Wireless Print Server Configuration . 15 Chapter 4 Client PC Configuration . 18 Checking your Network Protocols (Windows 9x) . [. . . ] The receiving station must be set to [64 Bit Encryption], and have the same Key value in the same position in its key table. Otherwise, it will not be able to decrypt the data. [Default Key] Select the key you wish to be the default. Transmitted data is ALWAYS encrypted using the Default Key; the other Keys are for decryption only. [Key Table] This table is used when Encrypting and Decrypting data. All stations, including this Access Point, always transmit data encrypted using their default key. The key number (1, 2, 3, 4) is also transmitted. The receiving station will use the key number (1, 2, 3, 4) to determine which key value to use for decryption. If the key value does not match the transmitting station, decryption will fail. The easiest way to ensure there are no problems is to have every Station, including the Access Point, use the same key table (all entries identical). Then, it does not matter which key is used as the default key. 73 Chapter 6 Web-Based Management 128-bit Encryption If selected, data is encrypted using the key before being transmitted. The receiving station must be set to use 128 Bit Encryption, and have the same Key value. Otherwise, it will not be able to decrypt the data. [Key] Enter the key value you wish to use. WEP Authentication: Options are [Open System] or [Shared Key]. Some Wireless cards do not support both methods. Check your Wireless card's documentation to determine the correct value. Ensure that all Wireless stations use the same setting as the Access Point. 74 Configuration Screens Other Screens Server Status This screen shows server system data and the current settings for all of the other screens. It is read-only; no data can be input on this screen. Printer Ports This screen displays the current status of each port. For each port, the following data is listed: · Connected Printer The model name of the printer connected to the port, if the printer name is known. (If the printer is not bi-directional, this information is unavailable. ) Status The current status of the printer (On-line, Off-line, Out of paper) Printing Information This will show either [Idle] or [Printing]. · · 75 Chapter 6 Web-Based Management Logical Printers Logical Printers (ports) can be used under Unix. [. . . ] Products returned to SMC should have any customer-installed accessory or add-on components, such as expansion modules, removed prior to returning the product for replacement. SMC is not responsible for these items if they are returned with the product. Customers must contact SMC for a Return Material Authorization number prior to returning any product to SMC. Any product returned to SMC without a valid Return Material Authorization (RMA) number clearly marked on the outside of the package will be returned to customer at customer's expense. [. . . ]