User manual SMC SMCWIPCAM-G

[. . . ] LIMITED WARRANTY Limited Warranty Statement: SMC Networks, Inc. ("SMC") warrants its products to be free from defects in workmanship and materials, under normal use and service, for the applicable warranty term. All SMC products carry a standard 90-day limited warranty from the date of purchase from SMC or its Authorized Reseller. SMC may, at its own discretion, repair or replace any product not operating as warranted with a similar or functionally equivalent product, during the applicable warranty term. [. . . ] You can modify and delete a user by click the respective icon. 45 Advanced Timezone The Timezone submenu displays the current time setting of the camera. For system management purpose, a correct time setting is critical to have accurate time stamps on the system logs. - Method: Allow you to setup the correct time by getting time from the computer or time server (need an Internet connection). - Time Zone: Select a time zone according to your location. 46 Maintenance The Maintenance menu contains two submenus: Configuration and Firmware Upload. Move your mouse onto the Maintenance button, and it will automatically pop up a submenu bar as below. Maintenance Configuration The Configuration submenu contains four options: Idle Time, Reset Default, Reboot and Status. Idle Time Click the Idle Time item of the Configuration submenu to bring up the following page, which allows you to setup the idle time of the camera. 47 - Administrator Inactivity Timer: location. If the user does nothing within the specified time in this option, the system would automatically logout. The idle time must be larger than 0. Reset Default Click the Reset Default item of the Configuration submenu to bring up the following page, which allows you to load the default settings of the camera. Clicking Reset allows you to resume the factory default settings of the camera. This function is the same as pressing the Reset button on the camera. 48 Reboot Click the Reboot item of the Configuration submenu to bring up the following page, which allows you to restart the camera. Click Reboot to restart the camera. After reboot, both the Power LED and Link LED on the front panel will light on, and then you can enter your Name and Password to login. 49 Status Click the Status item of the Configuration submenu to bring up the following page, which displays the current configuration of the camera. The Status option contains information of the camera, including its basic status and the networking status. 50 Maintenance Firmware Upload The Firmware Upload submenu allows you to update the firmware of the camera once you obtained a latest version of firmware. Click Browse to point to the firmware file saved in your computer, and then click Upload. The system start to upgrade the firmware, and it will ask you to restart the camera. Click Restart when prompted. NOTE: It will take a few minutes to update firmware. Please wait to complete the procedure; you can then reboot the camera. 51 Logout Click the LOGOUT button to exit the Web Configuration Utility, and it will return to the login screen of the utility. 52 Help Click the HELP button to bring up a window, providing you with the general help information to control the camera. 53 6 FFDSHOW & AVISAVIOR This chapter describes FFdshow and AVISavior, which are provided in the Installation CD. FFdshow allows you to play the recorded video files on your computer. AVISavior allows you to fix the damaged recorded video files. Installing FFdshow Step 1 Insert the CD-ROM into the CD-ROM drive to initiate the autorun program. The menu screen will appear as below: 54 Step 2 Click the FFdshow Install item, and select the desired language in the pop-up dialog window. Then, the InstallShield Wizard will appear, click Next in the welcome screen. 55 Step 3 Read and accept the License Agreement; then, click I Agree. Step 4 Choose the components to be installed. If no specific requirement, leave the default setting and click Next. 56 Step 5 Choose the destination location. If no specific requirement, leave the default setting and click Install. Step 6 The InstallShield Wizard starts to install the software, and the progress bar indicates the installation is proceeding. Then, click Finish. 57 Configuration of FFdshow Before playing the recorded video file, you have to change the following settings in FFdshow: - Enable the Subtitles function. - Set the Error resilience option to none. Click Start > Programs > ffdshow > Configuration to open the ffdshow properties window. Select the Miscellaneous item, and then set the Error resilience option to none. Check this item. Set this option to none. 58 Playing the Video Since you have recorded video files from the camera, you can play the video files simply using Windows Media Player in your computer. Find the video file saved in the computer. Double-click the file, and it will open Windows Media Player (as default in Microsoft Windows) to play the video file. NOTE: By default, the destination folder to save the recorded video files is :\Program\IPView Pro\, and the file will be named as xxxxxxxx_yyyyyy. avi (where x is date and y is time). [. . . ] The Router Information Protocol (RIP), a part of the Transmission Control Protocol/Internet Protocol (TCP/IP) suite, forwards packets from one network to another using the same network protocol. R RARP Reverse Address Resolution Protocol, a TCP/IP protocol that allows a physical address, such as an Ethernet address, to be translated into an IP address. RJ-45 RJ-45 connector is used for Ethernet cable connections. A router is the network software or hardware entity charged with routing packets between networks. Router S Server It is a simple computer that provides resources, such as files or other information. The Simple Mail Transfer Protocol is used for Internet mail. SNMP was designed to provide a common foundation for managing network devices. 109 SMTP SNMP Station In LANs, a station consists of a device that can communicate data on the network. [. . . ]