User manual SMC SMCWPS-G

[. . . ] TABLE OF CONTENTS COPYRIGHT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PRODUCT OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 WIRELESS SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Bindery Mode: To Enable Bindery Mode, if you want to setup Bindery environment. To select File Server Name of NetWare. Installing Print Server on NetWare 4. x/5. x Due to its architecture and functionality, the print server must work under NetWare 4. x/5. x NDS Bindery Emulation. When you install the NetWare file server for the first time, by default, the installation program will automatically set up the Bindery Emulation function for you by adding "SET BINDERY CONTEXT =" in the AUTOEXEC. NCF file. By default, the bindery context will only be set on your organization (O) object. If you have ever modified this line, or if you have ever added any organization units (OU) to your NDS tree after the NetWare system was installed, please read the following section before you install the print server. For the purpose of illustration, we assume the NDS tress structure is as follows: [ROOT] (O)ABC (OU)ABC-USA Admin FileServer-1 (OU) Tech (OU)Sales 45 Installation Procedure 1. At your file server console, type "load install". Select "Edit AUTOEXEC. NCF file". Add or Modify the "SET BINDERY CONTEXT =" line to include the NDS organization (O) and all organization unit (OU) objects where users are located. For example: SET BINDERY CONTEXT = O=ABC; OU=SALES. OU=ABC-USA. O=ABC; OU=TECH. OU=ABC-USA. O=ABC ; 5. When done, save the new AUTOEXEC. NCF file. Please restart your NetWare file server in order for new settings to take effect immediately. Next, please refer to "Auto Setup" section in this chapter to finish installing your print server. Log into your NetWare file server as a Supervisor (Admin. ) or equivalent via a Bindery connection. Run NetWare's PCONSOLE and add users to the "Queue Users" list. From your NetWare client computer, such as Windows 95/98/Me, create a printer that is connected (redirected) to the NetWare print queue serviced by the print server. Note: Please refer to NetWare's Print Server/Services manuals for detailed PCONSOLE commands. SNMP Setup TCP/IP networks use a standard management protocol called Simple Network Management Protocol (SNMP). SNMP is widely used in the industry as a solution for remote network management and monitoring of networking devices. SNMP actually includes a protocol, a database structure specification, and a set of database objects. The database objects are contained in a standard database called Management Information Base (MIB) that is stored on the networking device called SNMP agent. The print server's SNMP implementation runs in a TCP/IP environment. A host on the network running Network Management System (NMS) software can access the print server device by reading and writing the MIB objects stored in the device. [. . . ] Possible explanation and solution A printer driver is missing or is incompatible with that printer. Using a print driver that is not specific for the printer can cause printing errors. If these printer drivers are not available to you, please contact your printer manufacturer. Question C The upgrading process indication bar stops and does not seem to proceed again while upgrading the print server. Possible Explanation There might be a network problem. [. . . ]