User manual SMC SMCWUSBT-G

[. . . ] SMCWUSBT-G Wireless USB 2. 0 Adapter 802. 11b/g (54 Mbps) User's Manual Version 1. 02. 000 July 11, 2005 Contents ii Wireless USB 2. 0 Adapter Copyright Notice © 2005 All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of the seller. Disclaimer Information in this document is subject to change without notice. The statements, configurations, technical data, and recommendations in this document are believed to be accurate and reliable, but are presented without express or implied warranty. [. . . ] Enable/Disable Tray Icon: Enable or disable the tray icon . 3. Manual LEAP Login: Log in to LEAP manually, if LEAP is set to manually prompt for user name and password on each login. Reauthenticate: Re-authenticate to a LEAP-configured access point. Exit: Exit the Utility application. Options Tab To change the display settings, choose Options > Display Settings from the menu. Signal Strength Display Units: Set the units used when displaying signal strength: percentage (%) or dBm. Refresh Interval: Use the up/down arrows to set the display refresh interval in seconds. Data Display: Set the display to cumulative or relative: Relative: displays the change in statistical data since the last update. Cumulative: displays statistical data collected since opening the profile. 15 Wireless USB 2. 0 Adapter Help Tab If you want to know the operation guide and the version number of utility, you can select Help for the details, as shown below. Current Status Tab The Current Status tab contains general information about the program and its operations. The Current Status tab does not require any configuration. 16 Chapter 3: Utility Configuration The following table describes the items found on the Current Status screen. Profile Name The name of the current selected configuration profile. Set up the configuration name by clicking New or Modify on the Profile Management tab. Link Status Shows whether the station is associated to the wireless network. Wireless Mode Displays the wireless mode. See advanced information about the program and its operations on the Advanced tab. IP Address Displays the computer's IP address. Network Type The type of network the station is connected to. The options include: · · Infrastructure (access point) Ad Hoc Configure the network type on the Advanced tab. Current Channel Shows the currently connected channel. Server Based Shows whether server-based authentication is used. Authentication Data Encryption Displays the encryption type the driver is using. Configure the encryption type by clicking New or Modify on the Profile Management tab on the Security tab. Signal Strength Shows the strength of the signal. Advanced Tab Click the Advanced button on the Current Status tab of the Utility to see advanced information about the program and its operations. [. . . ] Highlight a profile in the Auto Selected Profiles box. Click Move Up or Move Down as appropriate. The first profile in the Auto Selected Profiles box has highest priority, and the last profile has lowest priority. When auto profile selection is enabled by checking Auto Select Profiles on the Profile Management tab, the client adapter scans for an available network. [. . . ]