User manual SMC WIPCFN-G2

[. . . ] EZ Connect N EZ Connect VisionTM Draft 11n Wireless USB2. 0 Adapter Wireless IP Camera SMCWIPCFN-G2 Copyright The information provided by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SMC. [. . . ] Zoom In Buttons ­ Click the buttons to zoom in the live view image by 1x, 2x, and 3x. Night Mode Button ­ Click the button to enable the "night shot mode" to deliver clearer images in low-light environments. Please note that the night mode will reduce the frame rate of the video setting. NOTE In Windows Vista it's necessary to disable the protected mode in the security settings of Internet Explorer to find the recorded images or videos that were stored by Snapshot or Manual Record. Please follow the steps below to disable the protected mode: 1. Disable "Enable Protected Mode" then press OK - 46 - 3. 3 Configuring the IP Address of the PC When the access to the camera fails, please first check the IP address of the computer. Before configuring the camera the PC or laptop must be configured to be in the same LAN segment as the network camera in order for the two devices to communicate. On the computer, click Start control panel window. Double-click Network Connection to open the network connection window. Right-click Local Area Connection and then click Properties from the shortcut menu. When the Local Area Connection Properties window appears, select the General tab. Select Internet Protocol [TCP/IP] and then click Properties to bring up the Internet Protocol [TCP/IP] properties window. To configure a fixed IP address that is within the segment of the camera, select the Use the following IP address option. Then, enter an IP address into the empty field. The suggested IP address is 192. 168. 2. x (x is 1~254 except 10) and the suggested Subnet mask is 255. 255. 255. 0. When you are finished, click OK. . - 47 - CHAPTER 4 CONFIGURING THE CAMERA 4. 1 Using the Web Configuration It's possible to access and manage the camera through the web browser or the provided software application IP CAMERA MANAGER. This Chapter describes how to configure the camera by using the web browser. To configure the camera, click Setup on the main page of web configuration. The web configuration will start from the Basic page. The web configuration contains the main settings that are required for the camera in the left menu bar, including Smart Wizard, Basic, Network, Video/Audio, Event Server, Motion detect, Event Config, Tools, USB, and Information. - 48 - 4. 2 Using Smart Wizard The camera's smart wizard lets you configure the camera easily and quickly. The wizard will guide the user through the necessary settings with detailed instructions on each step. To start the wizard, click Smart Wizard in the left menu bar. [. . . ] RTP (Real-time Transport Protocol) is a data transfer protocol defined to deliver live media to the clients at the same time, which defines the transmission of video and audio files in real time for Internet applications. RTSP (Real-time Streaming Protocol) is the standard used to transmit stored media to the client(s) at the same time, which provides client controls for random access to the content stream. RTSP S - 89 - Server SIP SMTP SNMP Station Subnet mask It is a simple computer that provides resources, such as files or other information. SIP (Session Initiated Protocol) is a standard protocol that delivers the real-time communication for Voice over IP (VoIP), which establishes sessions for features such as audio and video conferencing. The Simple Mail Transfer Protocol is used for Internet mail. [. . . ]