User manual SMEG 2130S

[. . . ] 10 Before Putting Into Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Instructions for Use Mounting Instructions We Care for the Environment Tips for Energy Savings Operation Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Temperature Selection Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Storing Fresh Foods Freezing Fresh Foods Storing Frozen Foods Important . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Storing Time During Power Supply Interruption Disposing of the Worn Out Appliance Maintenance and Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Automatic Defrosting of the Refrigerator Manual Defrosting of the Freezer Cleaning the Appliance Switch Off the Appliance When Not In Use Placing and Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Choosing the Right Place Connection to Power Supply Trouble-Shooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Description of the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If you want to remove it, slightly lift up the back part and pull it out. Glass shelves (some models only have them) are protected with plastic spacers. Before pulling the shelf out, spacers must be moved towards you. Spacers can be also removed, however, it is better to keep them for any later transport. Quickly perishable food should be stored on the back i. e. the coldest part of the shelves. Bottle rack (in some models only) Bottle rack (number depends on model) is intended for storing the bottles. There are two installation positions available (horizontal or lifted in the front) thus enabling the positioning of bottles on the stopper as well. If you want to pull it out, simply lift its rear part and pull it towards you. If the door contains storing shelves, install the rack in such position that the length of the bottles will not hinder the closing of the door. The rack may carry 9 bottles of 0, 75 l or more at the maximum (total weight max. 13 kg) ­ note the label underneath the thermostat box inside the appliance. 12 Instructions for Use Defrost Water Outlet (2) The interior of the refrigerator is cooled with cooling plate incorporated in the rear wall. Food should not touch the rear wall of the refrigerator!Foods should be cooled down before storing. Crispy and delicate foods should be stored in the coldest parts of the refrigerator. Try not to open the door too often. Instructions for Use 13 Set the thermostat to the setting where lower temperatures are reached. Set the thermostat gradually as to avoid freezing of the foods. Use a thermometer and measure the temperature in the individual compartments. If the loaded amount is too large, the quality of freezing is reduced which affects the quality of frozen foods. The next time you want to freeze fresh foods, repeat the freezing procedure and be careful that packages with fresh foods do not touch frozen packages. For freezing smaller amount of foods (up to 1 kg) there is no need to change the thermostat setting (see Temperature Selection). Storing Frozen Foods Packages of frozen foods are stored in the basket. If you remove the baskets, you can store frozen packages directly on the cooling shelves. Freezing Procedure If you have a model without the integrated switch for intensive cooling, turn the thermostat knob to position 4-6 some 24 hours before loading. After 24 hours load the freezer shelf with fresh food packages. Some 24 hours after loading, turn the thermostat knob to operating position if necessary (see "Temperature selection"), and then reload the frozen packages into the storage baskets (storing compartment). [. . . ] the appliance and when it is getting cool, the underpressure seals the door. After few minutes (5-10), the door can easily be opened. The Appliance Fails to Operate After connecting to the Mains Supply Check the supply in the outlet socket and make sure the appliance is switched on (thermostat in operating position). Noise Cooling in refrigerating-freezing appliances is enabled by the refrigerating system with compressor, which produces noise. How noisy the appliance is depends on where it is placed, how it is used and how old the appliance is. During the operation of the compressor the noise of liquid is heard and when the compressor is not operating, the refrigerant flow is heard. [. . . ]