User manual SMEG 500G

[. . . ] • If the power supply cable is damaged, contact technical support immediately and they will replace it. Risk of damaging the appliance • Never rest sharp metallic objects such as knives, forks, spoons and lids on the appliance during use. • Do not use abrasive or corrosive detergents on glass parts (e. g. powder products, stain removers and metallic sponges). [. . . ] • MAX: In this position, the knob indicates the appliance is on MAXIMUM. 21 Description 2. 2 Other parts Lid 2. 3 Available accessories Beer rack It is only fitted for styling purposes, but it can be raised to move beverages inside the refrigerator compartment. Lid rod Useful to position beer bottles and small plastic bottles. Bottle rack Useful to keep the appliance lid open. Sliding doors Useful to store glass bottles. Pack rack Useful to keep beverages as cool as possible. Useful to store fruit juices, milk cartons and cans. 22 Use 3 Use 3. 1 Instructions Improper use Risk of damage to the appliance • Do not use sharp objects when removing ice and frost to avoid damaging the appliance's walls. • Do not sit or lean on the door or any open drawers. • Do not touch the heating elements on the outside of the appliance. • Do not store inflammable, explosive or volatile substances. • Organic compounds, acids and essential oils can corrode the seals and plastic surfaces if left in contact with them for extended periods. • Bottles containing strong alcoholic drinks must be tightly closed and stored vertically. 3. 3 First use 1. Adjust the thermostat knob from MIN to MAX to set the desired temperature. The higher the number set, the lower the refrigerator temperature will be. 3. 4 Accessing the refrigerator compartment Raise the appliance lid to access the refrigerator compartment. Inside, you will find a rod on the right-hand side to keep it raised while you move beverages around inside the refrigerator compartment. Raise the lid and grab the top of the rod seated in the slot. Move the rod a few centimetres to the left to release the tip of the slot. 3. 2 Preliminary operations 1. Remove any protective film from the outside or inside of the appliance, including accessories. Remove any labels (apart from the technical data plate) from the accessories and shelves. Remove and wash all the appliance accessories. 23 EN Use 3. With the lid raised, turn the rod downwards and place the tip onto the metal plate situated to the right of the sliding doors. Move the tip of the rod towards the right into the slot in the plate. Slide the tip of the rod all the way to the end of the slot in the plate. 3. 5 Using the accessories Layout of accessories The accessories can be arranged along the purpose-designed guides inside the refrigerator compartment. Beer rack assembly 1. [. . . ] Turn the front castors by 90° with the brake levers turned to face the centre of the appliance. Should you need to lift the appliance, with the aid of a second person, grip the wheel arches using both hands. 2. Press the brakes on the front castors down until they click in place. 29 EN Installation Positioning Place the appliance on a stable and level floor. We recommend moving the appliance very carefully in order to avoid damaging the floor (especially in the case of wooden floors). [. . . ]