User manual SMEG CBE54/1

[. . . ] BEFORE INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AVAILABLE ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . USING THE OVEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . COOKING WITH THE OVEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] While waiting for the start time it is not possible to select another cooking function. At the end, the word STOP will appear on DSP1, cooking will stop and a buzzer will sound; press PT1 once to deactivate it. It is also possible to select an additional cooking time semi-automatically by turning PT1. If you wish to continue cooking beyond the set time, press PT1 again. The oven will restart normal operation with the temperature settings selected previously. PT2 has to be pressed to switch the oven off completely. Modifying the data set Once automatic cooking has started, its duration can be changed. When the and symbols are steady and cooking is in progress, or the oven is in stand-by status waiting for cooking to start, press PT1 once. The symbol starts flashing and PT1 can be turned to change the set duration. Press PT1 again; the symbol goes out, the symbol will start to flash, and the cooking start time will be displayed on DSP1. The cooking start time can be increased or decreased by turning PT1. A few seconds after the last change, the and symbols will appear (in steady mode) on DSP1 and automatic cooking will restart with the new settings. Once cooking has been programmed, before it starts, the function or recipe symbol will remain on, as will the symbols , . 15 Instructions for the user 7. 8 Selecting a recipe The oven has 9 preset recipes and 3 memories; a recipe is a preset of function, temperatures, cooking times and shelf position for the dish. In the ON state only, a recipe can be selected by simply turning PT2 to the right or left. Press PT1 to move on to setting of the next function. Child lock-out mode: activating this mode after two minutes of operation without any intervention from the user the controls will automatically be locked, indicated by the coming on of the symbol . To disconnect the temporary lock during cooking, hold down PT1 for at least 5 seconds. Two minutes after the last setting the lock will become active again. If a knob is turned "bloc" appears for 2 seconds. Showroom mode: (only for exhibitors) activating this mode disables all the heating elements so that only the control panel works (some models display the symbol ). To use the oven normally, set this mode to OFF. Power limiter mode: by selecting LO while cooking with the main oven a limited amount of power will be used, according to the model. To reset the product's normal consumption, select HI. PO-HI = normal power PO-LO= low power 19 Instructions for the user 8. COOKING WITH THE OVEN ECO: Using the grill and the bottom heating element plus the fan is particularly suitable for cooking small quantities of food, as it provides low energy consumption. [. . . ] · Reposition the internal glass pane, taking care to centre and insert the 4 pins attached to the glass into their slots on the oven door by applying a light pressure. 33 Instructions for the user 10. 5 What to do if. The oven display is full · off · Check the mains power supply. Check whether an omnipolar switch upstream from the oven feed line is in the "ON" position. Check whether the "showroom" mode has been set, for further details see paragraph "Secondary menu" at page 19. Check whether the "child lock-out function" mode has been set, for further details see paragraph "Secondary menu" at page 19. [. . . ]