User manual SMEG CD7276NLD2P

[. . . ] Cleaning and user maintenance shall not be made by children without supervision. This appliance is intended to be used in household and similar applications such as: – Farm houses; staff kitchen areas in shops, offices and other working environments – By clients in hotels, motels, bed and breakfast and other residential type environments Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. General Safety • • 3 • • • • • • • Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer. Do not use water spray and steam to clean the appliance. [. . . ] The fridge temperature indicator shows dashes. The fridge OFF indicator is shown. Holiday function This function allows you to keep the appliance closed and empty during a long holiday period without the formation of bad odours. Press the Mode until the corresponding icon appears. The temperature indicator shows the set temperature. The Holiday indicator is shown. High temperature alarm An increase in the temperature in the freezer compartment (for example due to 7 The function switches off by selecting a different set temperature. DrinksChill function The DrinksChill function is to be used to set an acoustic alarm at the preferred time, useful for example when a recipe requires to cool down food products for a certain period of time. It is also useful when a reminder is needed in order not to forget the bottles placed in the freezer for fast cooling. Press Mode until the corresponding icon appears. The Timer shows the set value (30 minutes) for a few seconds. Press the Timer regulator to change the Timer set value from 1 to 90 minutes. At the end of the countdown the DrinksChill indicator flashes and an audible alarm sounds. Press OK to switch off the sound and terminate the function. The freezing process lasts 24 hours: during this period do not add other food to be frozen. When the freezing process is completed, return to the required temperature (see "FastFreeze Function"). Put the ice trays in the freezer compartment. Cold accumulators The freezer contains at least one cold accumulator which increases storage time in the event of a power cut or breakdown. Frozen Food Calendar It is possible to switch on the device manually when needed (refer to "FreeStore function"). The FreeStore device stops when the door is open and restarts immediately after the door closing. The symbols show different types of frozen goods. The numbers indicate storage times in months for the appropriate types of frozen goods. Whether the upper or lower value of the indicated storage time is valid depends on the quality of the foods and treating before freezing. Ice-cube production This appliance is equipped with one or more trays for the production of ice-cubes. HINTS AND TIPS Normal operating sounds The following sounds are normal during operation: • A faint gurgling and bubbling sound from coils sound when refrigerant is pumped. • A whirring and pulsating sound from the compressor when refrigerant is pumped. • A sudden cracking noise from inside appliance caused by thermic dilatation (a natural and not dangerous physical phenomenon). • A faint click noise from the temperature regulator when the compressor switches on or off. Hints for energy saving • Do not open the door frequently or leave it open longer than absolutely necessary. • If the ambient temperature is high and the Temperature Regulator is set to low temperature and the appliance is fully loaded, the compressor may run continuously, causing frost or ice on the evaporator. If this happens, set the Temperature Regulator toward warmer settings to allow automatic defrosting and so a saving in electricity consumption. [. . . ] Make sure that food products do not touch the rear plate. Attach the melting water outlet to the evaporative tray. Water flows on the floor. The melting water outlet is not connected to the evaporative tray above the compressor. The FastFreeze or Shopping function is switched on. Temperature cannot be set. Switch off FastFreeze or Shopping manually, or wait until the function resets automatically to set the temperature. Refer to "FastFreeze or Shopping function". [. . . ]