User manual SMEG CE65MFA

[. . . ] GETTING TO KNOW YOUR COOKER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 5. 1 General Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BEFORE INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AVAILABLE ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To turn off the burner, turn the knob to the O position. 35 Instructions for the User 10. USING THE MAIN OVEN symbol. To be able to 10. 1 First use At first use, or after a power failure, the oven's display will show a flashing start any cooking function with the main oven, the current time must be set. 10. 2 Setting the current time To adjust the current time with the flashing display: · · Press the buttons or to decrease or increase the time shown. If the button is held down in one direction the time changes faster. When any button is released, after a few seconds the display will stop flashing and only the colon separating the hour and minutes will flash to indicate its correct operation (The symbol will be shown on the display). It might become necessary to change the current time, for example at the switch from Summer to Winter time. Hold down the button for a few seconds until the symbol stops flashing. Repeat the operations described in point "10. 2 Setting the current time". 10. 2. 1Using the minute minder The minute minder can be used during cooking or when the oven is turned off. The setting procedure is the same for both cases. Press the button briefly, the symbol will flash and the display will show the time remaining from a previously programmed count). symbol (or the or to increase or decrease the minute minder time from 00:01 to 03:59 (hold Press the buttons the button down to go faster). symbol will appear; if you do not set a time within few a seconds, the oven will return to manual mode; otherwise, you can set a cooking time (max 23. 59) using the Press the key again; the symbol will start to flash; if you do not set a time within a few seconds, the oven will return to semiautomatic mode; otherwise, you can set a cooking time (max 23. 59) using the or keys. A few seconds after the last change, the display will show the current time and the oven will be in standby waiting for the set start time. At the end, the word STOP will appear on DSP1, cooking will stop and a buzzer will sound; press deactivate it. If you wish to continue cooking beyond the set time, press the normal operation with the previously selected cooking settings. The oven will restart 37 Instructions for the User Modifying the data set: Once automatic cooking has started, its duration can be changed. When the and symbols are steady and cooking is in progress, or the oven is in standby status key; the symbol starts to flash and it is possible to change key again; the symbol starts flashing. waiting for cooking to start, press the the cooking time using the Use the or or keys. Press the keys to change the cooking end time. symbol will stop flashing, and automatic cooking will restart A few seconds after the last change, the with the new data that have ben set. Once cooking has been programmed, but before it starts, the symbol of the chosen function or recipe will remain on, as will the , symbols. 10. 5 Cooking with selection of a recipe The oven has 8 preset recipes (see "10. 6 Table of predefined recipes:") and 2 memories. A recipe is a combination of function, temperatures and cooking times presettings. Only when PT1 is positioned on "O" it is possible to select a recipe simply by turning PT2 onto . Press the or keys; the selected recipe will change its colour to red on the display; a few seconds later cooking will start with the preset parameters. When the preset temperature is reached, a series of beeps will be emitted indicating that the oven is ready for use. [. . . ] Lift the door up forming an angle of approximately 45° and remove it. To reassemble, fit the hinges A into their grooves, then lower the door into place and release the levers B. 14. 3 Removing the door seal To permit thorough cleaning of the oven, the seal may be removed. Before removing the seal, take off the door as described above. Once the door has been taken off, lift the tabs at the corners as shown in the figure. 47 Instructions for the User 14. 4 what to do if. . . The oven display is completely off: · · · Check the mains power supply. [. . . ]