User manual SMEG CE65MFX

[. . . ] GETTING TO KNOW YOUR OVEN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BEFORE INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AVAILABLE ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] A few seconds after the last change, the display will show the current time and the oven will be in standby waiting for the set start time. At the end, the word STOP will appear on DSP1, cooking will stop and a buzzer will sound; press deactivate it. If you wish to continue cooking beyond the set time, press the normal operation with the previously-selected cooking settings. The oven will restart 43 Instructions for the user Modifying the programmed data: Once automatic cooking has started, its duration can be changed. When the and symbols are steady and cooking is in progress or the oven is in standby status . The symbol begins to flash and by pressing the button again. The or waiting for cooking to start, press button the cooking duration can be changed. Press the flash, use the or symbol will begin to buttons to modify the the end of cooking time. symbol will stop flashing, and automatic cooking will restart A few seconds after the last change, the with the new programmed data. Once cooking has been programmed but before it starts, the symbol of the chosen function or recipe will remain on, as will the , symbols. 10. 5 Cooking with selection of a recipe The oven has 8 preset recipes (see "10. 6 Table of predefined recipes:") and 2 memories. A recipe is a combination of function, temperatures and cooking times presettings. Only when PT1 is positioned on "O" it is possible to select a recipe simply by turning PT2 onto . Press the or keys; the selected recipe will change its colour to red on the display; a few seconds later cooking will start with the preset parameters. Select or deselect the power limiter mode. With the PT2 knob positioned on "O", press the secondary menu. With the Press and and buttons for at least 3 seconds to view the buttons, it is possible to change the status of the setting (ON / OFF) (HI / LO). to move on to setting the next function. Child lock-out mode: by activating this mode, after two minutes of operation without any intervention from the user, the controls will automatically be locked, indicated by the symbol turning on. To disconnect the temporary lock during cooking, hold down the button for at least 3 seconds. Two minutes after the last setting the lock will become active again. When turning the PT2 knob, the word "BLOC" is shown permanently. The word only disappears when the knob is turned back to the original start condition. If the PT1 knob is turned, the cooking temperature will not change and the word "BLOC" will be shown. Showroom mode: (only for showrooms) by activating this mode, the oven deactivates all the heating elements, while keeping the control panel active. To use the oven normally, set this mode to OFF. [. . . ] To reinsert it, groove B must be inserted with the oven's frame, putting hinge A in the position illustrated in the figure and pushing it all the way in with one push using a screwdriver or equivalent tool until you feel it click. 15. 3 Removing the door seal To permit thorough cleaning of the oven, the seal may be removed. Before removing the seal, take off the door as described above. Once the door has been taken off, lift the tabs under the seal as shown in the figure. 59 Instructions for the user 15. 4 what to do if. . . The oven display is completely off: · · · Check the main power supply. Check whether an omnipolar switch upstream from the oven feed line is in the "ON" position. [. . . ]