User manual SMEG CE9IMXA

[. . . ] PRECAUTIONS FOR USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RECYCLING INSTRUCTIONS - OUR ENVIRONMENT POLICY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INTENDED USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] symbol will stop flashing, and automatic cooking will restart A few seconds after the last change, the with the new programmed data. Once cooking has been programmed but before it starts, the symbol of the chosen function or recipe will remain on, as will the , symbols. 10. 5 Cooking with selection of a recipe The oven has 8 preset recipes (see "10. 6 Table of predefined recipes:") and 2 memories. A recipe is a combination of function, temperatures and cooking times presettings. Only when PT1 is positioned on "O" it is possible to select a recipe simply by turning PT2 onto . Press the or keys; the selected recipe will change its colour to red on the display; a few seconds later cooking will start with the preset parameters. When the preset temperature is reached, a series of beeps will be emitted indicating that the oven is ready for use. The cooking time as specified in the table "10. 6 Table of predefined recipes:" starts from this moment. Modifying the data set (during cooking) During cooking it is possible to manually change the temperature that was preset for the recipe by turning PT1 to the desired cooking temperature. To modify the cooking time press the key; the or symbol flashes on the display. You can increase or decrease the cooking end time using the keys. These changes are not saved permanently. 10. 5. 1 Automatic cooking with selection of a recipe Only when the PT1 knob is positioned on "O" it is possible to select a recipe, simply by turning PT2 onto . Press the or keys; the selected recipe will change its colour to red on the display. Within a few key on the display; the symbol will flash. Press the key again; the seconds press the symbol will start to flash; if you do not set a time within a few seconds, the oven returns to recipe mode and starts cooking; otherwise, you can set a cooking time (max 23. 59) using the or keys. A few seconds after the last change, the display will show the current time and the oven will be in standby waiting for the set start time. At the end, the word STOP will appear on DSP1, cooking will stop and a buzzer will sound; press deactivate it. to Once cooking has been programmed, before it starts, the function or recipe symbol will remain on, as will the symbols , . 14 Instructions for the User 10. 5. 2 Making permanent changes to a recipe The oven has 8 preset recipes (see "10. 6 Table of predefined recipes:"), and 2 to set according to your own named cooking preferences preset. To modify or set a recipe permanently: 1 With the PT1 and PT2 knobs positioned on "O" press the 2 Select the recipe you want to change using the are shown on the display. 3 Press the key; the display shows the preset function. (see "10. 6. 1 Association display icon or key for 3 seconds. keys; the current settings for that recipe . In addition, you can modify the other recipes that are already function") To change it, turn PT2 to the desired function. 6 Press the key to exit from recipe programming. key the preset temperature will flash on the display; turn PT1 to change the key the cooking time flashes on the display; use the or keys to 15 Instructions for the User 10. 6 Table of predefined recipes: Class Type Qty. [. . . ] Check whether the "power limiter" mode has been set, for further details see point "10. 7 Secondary menu". Verify whether the interlock device has been switched off. If it has not, the oven has a protection device that does not allow functions to be selected while the interlock device is active. The interlock device has not properly hooked to the door. [. . . ]